JVC GR-FXM333 Instructions Manual Download

Page: 6 / 60

GETTING STARTED

(cont.)

Clock (Lithium) Battery Insertion/Removal

This battery is necessary for clock operation and to
perform date/time settings.

SWITCH OFF POWER

Switch off the unit’s power and remove the power
supply unit (battery pack, AC Power Adapter/Battery
Charger, etc.).

REMOVE BATTERY HOLDER

Pull out the battery holder.

INSERT BATTERY IN HOLDER

Insert the battery in the holder, and be sure to have
the “+” mark visible.

RE-INSERT HOLDER

Slide the holder back into the slot until you hear a
click.

NOTES:

●

See “SAFETY PRECAUTIONS” (

pg. 2) for information

on safe handling of lithium batteries.

●

To avoid losing the battery and/or battery holder, place
the camcorder with the grip side up as shown in the
illustration when inserting/removing the battery.

Slot

Battery holder

Summary of Contents for GR-FXM333





























































Search results

Summary of Contents for GR-FXM333

Reviews:

Related manuals for GR-FXM333

Brands by name

Popular brands

JVC GR-FXM333, Instructions Manual

Search results

Summary of Contents for GR-FXM333

Reviews:

Related manuals for GR-FXM333

Brands by name

Popular brands