EN
85
Master Page: Right
GR-DVX707EG_80-103.fm
Page 85
Other problems
24.
Although Snapshot is
attempted, flash does not take
place.
24.
• The subject is too bright with
the flash set to “AUTO” or
“AUTO
C
”.
• If blinks, the flash is being
charged.
• The camcorder is in the
Record mode.
• In the Menu Screen, “GAIN
UP” is set to “OFF” or
“
r
PROGRAM AE” is set to
“TWILIGHT”.
24.
• Set “FLASH” to “ON” in
MANUAL Menu.
(
墌
pg. 38, 47)
• It can take up to 10 seconds
to charge the flash.
• Set the camcorder in the
Record-Standby mode.
(
墌
pg. 53, 54)
• Set “GAIN UP” to
“AUTO
” or “ACG”
(
墌
pg. 38, 45) or disengage
the “TWILIGHT” mode.
(
墌
pg. 38, 42)
25.
Although a Snapshot is taken
with the flash, Red-Eye
Reduction does not take place.
25.
• The subject does not look
straight toward the flash.
• The subject does not look at
the first flash, which is an
important part of Red-Eye
Reduction.
• The camcorder is too far
from the subject.
• “FLASH” is not set to
“AUTO
C
” in MANUAL
Menu.
25.
• The subject should look
straight toward the flash,
especially the first flash. If
the subject does not see the
first flash, it will be difficult
for Red-Eye Reduction to
take place. (
墌
pg. 54)
• The flash is effective for
subjects at a distance of
approx. 0.7 m to 2 m from
the camcorder. (
墌
pg. 54)
• Set “FLASH” to “AUTO
C
”
to display the Red-Eye
Reduction indicator.
(
墌
pg. 38, 54)
SYMPTOM
POSSIBLE CAUSES
CORRECTIVE ACTION
26.
The CHARGE indicator on the
camcorder does not light.
26.
• The temperature of the
battery is extremely high/low.
• Charging is difficult in places
subject to extremely high/
low temperatures.
26.
• To protect the battery, it is
recommended to charge it in
places with a temperature of
10°C to 35°C. (
墌
pg. 88)
27.
“SET DATE/TIME!” appears.
27.
• The built-in clock’s
rechargeable lithium battery
is discharged.
• The previously set date/time
is erased.
27.
• Connect the camcorder to an
AC outlet using the AC
Adapter for over 24 hours to
charge the clock’s lithium
battery. (
墌
pg. 15)
28.
There is no picture.
28.
• The camcorder is not getting
power, or some other
malfunction exists.
28.
• Turn the camcorder’s power
off and on again. (
墌
pg. 14)
29.
Some functions are not
available using the
MENU
Wheel.
29.
• The Power Switch is set to
“
A
”.
29.
• Set the Power Switch to “
M
”.
(
墌
pg. 14)
30.
Files stored in the memory
card cannot be deleted.
30.
• Files stored in the memory
card are protected.
30.
• Remove protection from the
files stored in the memory
card and delete them.
(
墌
pg. 31 – 33)
CONTINUED ON NEXT PAGE
GR-DVX707EG_80-103.fm Page 85 Thursday, January 31, 2002 12:47 PM
