JVC GR-DVX400 Instructions Manual Download

Page: 83 / 104

Master Page: Right

GR-DVX707EG_80-103.fm

Page 83

Video and D.S.C. (GR-DVX707/507 only) Playback

During recording, sound
cannot be heard.

• The optional headphones are

not connected to the
headphones connector.
(GR-DVX707 only)

• The sound volume of the

headphones connector
(GR-DVX707 only) was not
adjusted appropriately. The
sound volume at this point is
the same as the level it was
adjusted to during playback.

• Connect the optional

headphones to the
headphone connector
(GR-DVX707 only).
(

墌

pg. 95)

• Adjust the sound volume

during playback. (

墌

pg. 22)

The LCD monitor or
viewfinder indications blink.

• Certain Wipe/Fader effects,

certain modes of Program AE
with special effects, “DIS”
and other functions that
cannot be used together are
selected at the same time.

• Re-read the sections covering

Wipe/Fader effects, Program
AE with special effects and
“DIS”. (

墌

pg. 38, 40 –

43, 46)

Digital Zoom does not work.

• 10X optical zoom is selected.
• The

VIDEO/MEMORY

Switch is set to “MEMORY”.

• Set “ZOOM” to “40X” or

“200X”. (

墌

pg. 44)

• Set the

VIDEO/MEMORY

Switch to “VIDEO”.

SYMPTOM

POSSIBLE CAUSES

CORRECTIVE ACTION

Play, Rewind and Fast-Forward
functions do not work.

• The Power Switch is set to

“

” or “

”.

•

VIDEO/MEMORY

Switch is

set to “MEMORY”.

• Set the Power Switch to

“

”. (

墌

pg. 22)

• Set the

VIDEO/MEMORY

Switch to “VIDEO”.

10.

The LCD monitor image is
distorted.

10.

• During playback of the

unrecorded portion, High-
speed Search and still
playback, LCD monitor
indications appear distorted.
This is not a defect.

10.

—

11.

The tape is moving, but there is
no picture.

11.

• Your TV has AV input

terminals, but is not set to its
VIDEO mode.

• The cassette holder cover is

open.

11.

• Set the TV to the mode or

channel appropriate for
video playback.
(

墌

pg. 24, 25)

• Close the cassette holder

cover. (

墌

pg. 16)

12.

Blocks of noise appear during
playback, or there is no
playback picture and the
screen becomes blue.

12.

—

12.

• Clean the video heads with

an optional cleaning
cassette. (

墌

pg. 91)

13.

A memory card cannot be
played back.

13.

• The Power Switch is set to

“

” or “

”.

• The

VIDEO/MEMORY

Switch is set to “VIDEO”.

13.

• Set the Power Switch to

“

”. (

墌

pg. 28)

• Set the

VIDEO/MEMORY

Switch to “MEMORY”.

CONTINUED ON NEXT PAGE

GR-DVX707EG_80-103.fm Page 83 Tuesday, February 5, 2002 3:20 PM

Summary of Contents for GR-DVX400









































































































Search results

Summary of Contents for GR-DVX400

Reviews:

Related manuals for GR-DVX400

Brands by name

Popular brands

JVC GR-DVX400, Instructions Manual

Search results

Summary of Contents for GR-DVX400

Reviews:

Related manuals for GR-DVX400

Brands by name

Popular brands