JVC GR-DVX400 Page 84 Instructions Manual Download

Page: 84 / 104

Master Page: Left

GR-DVX707EG_80-103.fm

Page 84

Advanced features

SYMPTOM

POSSIBLE CAUSES

CORRECTIVE ACTION

14.

The focus does not adjust
automatically.

14.

• Focus is set to the Manual

mode.

• The recording was done in a

dark place, or the contrast
was low.

• The lens is dirty or covered

with condensation.

14.

• Set Focus to the Auto mode.

(

墌

pg. 55)

• Clean the lens and check the

focus again. (

墌

pg. 91)

15.

Snapshot mode cannot be
used.

15.

• The Squeeze mode

(SQUEEZE) is selected.

15.

• Disengage the Squeeze

(SQUEEZE) mode.
(

墌

pg. 46)

16.

The colour of Snapshot looks
strange.

16.

• The light source or the

subject does not include
white. Or there are various
different light sources behind
the subject.

• The Sepia (SEPIA) or

Monotone (MONOTONE)
mode is activated.

16.

• Find a white subject and

compose your shot so that it
also appears in the frame.
(

墌

pg. 27, 53)

• Disengage the Sepia (SEPIA)

and Monotone
(MONOTONE). (

墌

pg. 42)

17.

The image taken using
Snapshot is too dark.

17.

• Shooting was performed

under backlit conditions.

17.

• Press

BACKLIGHT

(

墌

pg. 57)

18.

The image taken using
Snapshot is too bright.

18.

• The subject is too bright.

18.

• Set “

PROGRAM AE” to

“SPOTLIGHT”. (

墌

pg. 42)

19.

White Balance cannot be
activated.

19.

• The Sepia (SEPIA) or

Monotone (MONOTONE)
mode is activated.

19.

• Disengage the Sepia (SEPIA)

or Monotone (MONOTONE)
mode before setting White
Balance. (

墌

pg. 42, 43)

20.

Wipe/Fader effects do not
work.

20.

• The Power Switch is set to

“

”.

20.

• Set the Power Switch to “

”.

(

墌

pg. 14)

21.

The Black & White Fader does
not work.

21.

• The Sepia (SEPIA) or

Monotone (MONOTONE)
mode is activated.

21.

• Disengage the Sepia (SEPIA)

and Monotone
(MONOTONE). (

墌

pg. 42)

22.

Program AE with special
effects does not work.

22.

• The Power Switch is set to

“

”.

22.

• Set the Power Switch to “

”.

(

墌

pg. 14)

23.

Even when Slow Shutter is not
selected, the image looks like
it is activated.

23.

• When shooting in the dark,

the unit becomes highly
sensitive to light and the
image takes on an effect
similar to Slow Shutter.

23.

• If you want the lighting to

look more natural, set “GAIN
UP” to “ACG” or “OFF”.
(

墌

pg. 38, 45)

TROUBLESHOOTING (cont.)

GR-DVX707EG_80-103.fm Page 84 Thursday, January 31, 2002 12:47 PM

Summary of Contents for GR-DVX400









































































































Search results

Summary of Contents for GR-DVX400

Reviews:

Related manuals for GR-DVX400

Brands by name

Popular brands

JVC GR-DVX400, Instructions Manual

Search results

Summary of Contents for GR-DVX400

Reviews:

Related manuals for GR-DVX400

Brands by name

Popular brands