JVC GR-DVP1 Page 91 Instructions Manual Download

Page: 91 / 100

Indications

Function

Displays the battery remaining power.
Remaining power level: high
Remaining power level: exhausted
As the battery power comes close to nil, the battery indicator
blinks.
When the battery power is exhausted, power turns off automatically.

Appears when no tape is loaded.

(

墌

pg. 14)

Appears when the erase protection tab is set to “SAVE” while the Power
Switch is set to “

” or “

” and the VIDEO/MEMORY Switch is set to

“VIDEO”.

(

墌

pg. 18)

Appears if dirt is detected on the heads during recording. Use an optional
cleaning cassette.

(

墌

pg. 94)

Appears if condensation occurs. When this indication is displayed, wait
more than 1 hour until condensation disappears.

Appears if a tape is not loaded when the Recording Start/Stop Button or
SNAPSHOT Button is pressed while the Power Switch is set to “

” or

“

” and the VIDEO/MEMORY Switch is set to “VIDEO”.

Appears when the tape ends during recording or playback.

(

墌

pg. 77)

Appears if a tape in another format is loaded.

●

Appears when the date/time is not set.

(

墌

pg. 13)

●

Appears when the built-in clock (lithium) battery is discharged and the
previously set date/time is erased.

(

墌

pg. 13)

Appears after power is turned on if the lens cover is not slid down.

(

墌

pg. 20)

Appears if Audio Dubbing is attempted on a blank portion of a tape.

(

墌

pg. 66)

●

Appears if Audio Dubbing is attempted on a tape recorded in the LP
mode.

(

墌

pg. 66)

●

Appears if Audio Dubbing is attempted on a tape recorded in 16-bit
audio.

(

墌

pg. 66)

●

Appears if A. DUB (

) on the remote control is pressed when the erase

protection tab is set to “SAVE”.

(

墌

pg. 66)

●

Appears if Audio Dubbing using Digital Sound Effects is attempted
when a memory card is not loaded.

(

墌

pg. 67)

Appears when the memory card’s memory is full and shooting is not
possible.

Appears if Insert Editing is attempted on a blank portion of a tape.

(

墌

pg. 68)

Warning Indications

TAPE!

TAPE END

SET DATE/TIME!

MEMORY IS FULL

CHECK TAPE’S ERASE

PROTECTION TAB

HEAD CLEANING

REQUIRED USE

CLEANING CASSETTE

CONDENSATION

OPERATION PAUSED

PLEASE WAIT

DIFFERENT

FORMATTED TAPE

A. DUB ERROR!

<CANNOT DUB

ON A LP RECORDED

TAPE>

<CANNOT DUB

ON A 16BIT

RECORDING>

<CHECK TAPE’S ERASE

PROTECTION TAB>

<MEMORY CARD>

A. DUB ERROR!

INSERT ERROR!

CONTINUED ON NEXT PAGE

LENS COVER

Summary of Contents for GR-DVP1




































































































Search results

Summary of Contents for GR-DVP1

Reviews:

Related manuals for GR-DVP1

Brands by name

Popular brands

JVC GR-DVP1, Instructions Manual

Search results

Summary of Contents for GR-DVP1

Reviews:

Related manuals for GR-DVP1

Brands by name

Popular brands