56
EN
F
S
F
S
F
F
1
2
3
5
4
E X I T
EXPLOSION
6
S O U N D
APPLAUSE
Digital Sound Effects
12 sound effects (EXPLOSION, SIREN, LAUGHTER,
RACE CAR, DOOR BELL, BUZZER, FANFARE, AP-
PLAUSE, CHEERS, BOING, SCREAM and JEERS) pre-
stored in the provided memory card can be dubbed onto
a tape.
SOUND EFFECT MODE SELECTION
1
Load the provided memory card (
墌
pg. 16) and a
cassette (
墌
pg. 14).
2
Set the
VIDEO/MEMORY
Switch to “VIDEO”, then
set the Power Switch to “
” or “
” while pressing
down the Lock Button located on the switch. Open
the LCD monitor fully or pull out the viewfinder
fully.
3
Press
INDEX
. The sound effects Index Screen
appears.
4
Press
+
or
–
to select the desired sound effect.
•Pressing
D.SOUND
starts playback of the currently
selected sound effect so you can check it without
recording it onto the tape. Press
D.SOUND
again
to stop the sound effect playback.
5
Press
SET/SELECT
. The selection is complete and the
selected sound effect indication is displayed.
INDEX
Button
D.SOUND
Button
Display
Selected
(framed in
green)
You can download sound data available at our Web Site (see below for URL) and transfer them from your
PC to the memory card to create more sound effects.
http://www.jvc-victor.co.jp/english/download/d-sound/index.html
• Use the PC card adapter CU-VPSD60U or CU-V50U or floppy adapter CU-VFSD50U or CU-VFM40U to
transfer sound data from a PC to the memory card.
CU-V50U and CU-VFM40U: Available only for MultiMediaCard
CU-VPSD60U and CU-VFSD50U: Available for MultiMediaCard and SD Memory Card
• Sound data should be copied into the memory card’s DCSD\100JVCGR folder.
• The file names should be in numerical sequence starting from DVC00001.mp3. If you are using the
provided memory card, file names should be from DVC00013.mp3 since 12 sound effects are pre-stored
as DVC00001.mp3 through DVC00012.mp3.
FOR RECORDING
(cont.)
Power Switch
Index Screen
for sound
effects
Sound effect
indication
VIDEO/MEMORY
Switch
MENU Button
Lock Button
SET/SELECT
Button
+, – Button
