JVC GR-DVL9700 Page 45 Instructions Manual Download

Page: 45 / 100

PUSH

Slow-Motion Playback:

Allows slow-speed

search in the forward direction.

To change from normal to Slow-Motion Playback,
press

SLOW

more than approx. 2 seconds. After

approx. 2 minutes, normal playback resumes.
•You can also engage Slow-Motion Playback from

Still Playback by pressing

SLOW

more than

approx. 2 seconds.

To resume normal playback, press

●

For Slow Rewind, use the RM-V716U remote
control (provided) (

pg. 70).

●

During Slow-Motion Playback, due to digital image
processing, the picture may take on a mosaic effect.

●

After

SLOW

is pressed and held, the still image may

be displayed for a few seconds, followed by a blue
screen for a few seconds. This is not a malfunction.

●

There may be a small margin between the slow-
motion playback start point you chose and the
actual start point for Slow-Motion Playback.

●

During Slow-Motion Playback, there will be
disturbances in video and the picture may seem
unstable, especially with steady images. This is not
a malfunction.

Frame-By-Frame Playback:

Allows frame-

by-frame search.

To change from normal to Frame-By-Frame
Playback, press

SLOW

repeatedly. Each time it is

pressed, the frame is played back in the forward
direction.
Or, rotate

MENU/BRIGHT

towards “

” for forward

Frame-By-Frame Playback, or towards “

–

” for reverse

Frame-By-Frame Playback during Still Playback.
•You can also engage Frame-By-Frame Playback in

the forward direction from Still Playback by
pressing

SLOW

repeatedly.

To resume normal playback, press

●

You can also use the provided RM-V716U remote
control for Frame-By-Frame Playback (

pg. 70).

Playback Zoom and Playback Special

Effects

Available only with the RM-V716U remote control
(provided) (

pg. 70, 71).

Rewind Button (

)

Fast-Forward Button (

)

Play/Pause Button (

)

Stop Button (

)

SLOW Button

MENU/

BRIGHT Wheel

Summary of Contents for GR-DVL9700




































































































Search results

Summary of Contents for GR-DVL9700

Reviews:

Related manuals for GR-DVL9700

Brands by name

Popular brands

JVC GR-DVL9700, Instructions Manual

Search results

Summary of Contents for GR-DVL9700

Reviews:

Related manuals for GR-DVL9700

Brands by name

Popular brands