36
EN
TAPE DUBBING
VCR (Recording deck)
The connectors
are located
beneath the
cover.
TV
White to
Audio
Output L
Red to
Audio
Output R
To S-Video
Output
Audio cable
(optional)
White to
AUDIO L IN
Red to
AUDIO R IN
To S-VIDEO IN
S-Video cable
(optional)
* Connect when an S-Video cable is not used.
To Video
Output*
Video cable
(optional)
To VIDEO IN*
Tape Dubbing
1
Following the illustration, connect the camcorder and
the VCR. Also refer to pg. 32 and 33.
2
Set the camcorder’s Power Switch to “
”, turn on
the VCR’s power, and insert the appropriate cassettes
in the camcorder and the VCR.
3
Engage the VCR’s AUX and Record-Pause modes.
4
Engage the camcorder’s Play mode to find a spot just
before the edit-in point. Once it is reached, press
4
/
6
on the camcorder.
5
Press
4
/
6
on the camcorder and engage the VCR’s
Record mode.
6
Engage the VCR’s Record-Pause mode and press
4
/
6
on the camcorder.
7
Repeat steps 4 through 6 for additional editing, then
stop the VCR and camcorder when finished.
NOTES:
●
You can use Playback Zoom (
Z
pg. 40) or Playback
Special Effects (
Z
pg. 41) in step 5.
●
Before you start dubbing, make sure that the indications
do not appear on the connected TV. If they do, they are
being recorded onto the new tape.
To choose whether or not the following displays appear
on the connected TV . . .
•Date/Time
.... set “DISPLAY” to “ON” or “OFF” in the Playback
Menu (
Z
pg. 30).
•Time Code
.... set “TIME CODE” to “ON” or “OFF” in the Playback
Menu (
Z
pg. 30).
•Playback Sound Mode Display
.... set the Power Switch to “
”. Press MENU/BRIGHT
and set “ON SCREEN” in the Date/Time Menu (
Z
pg. 18 – 20) to “ON” or “OFF”. Then, set the Power
Switch back to “
”.
