JVC GR-DV808 Instructions Manual Download Page 69

Page: 69 / 88

SYMPTOM

POSSIBLE CAUSES

CORRECTIVE ACTION

10.

The tape is moving, but
there’s no picture.

11.

In the 5-Second mode,
recording ends before 5
seconds have elapsed.

12.

Snapshot mode cannot be

used.

13.

Digital Zoom doesn’t
work.

14.

P.AE/Effects and Fade/
Wipe Effects don’t work.

15.

The Black & White Fader
doesn’t work.

16.

The Dissolve function
doesn’t work.

17.

Scene transition does not
go as expected.

10.

•Your TV has AV input

terminals, but is not set to its
VIDEO mode.

•The cassette’s cover is open.

11.

•The 5-Second mode in the

System Menu is set to
“ANIM.”.

12.

•The Squeeze mode is

selected.

13.

•10X optical zoom is

selected.

•Picture Wipe or Dissolve are

being used in a scene
transition.

•5-Second recording was

done with the Power Dial set
to “5S”, and with “5SD”
selected in the System Menu.

•Snapshot was attempted

during Digital Zoom.

14.

•The Power Dial is set to “

”

or “5S”.

15.

•The Sepia or Monotone

effects are activated.

16.

•P.AE/Effect Sepia, Monotone

or Slow is activated.

•The Squeeze mode is

selected.

•The previously selected P.AE/

Effect was changed after the
last selected scene for
editing was registered.

17.

•When using “Picture Wipe/

Dissolve” (

pg. 35) or

“Dissolves during 5 second
mode recording”
(

pg. 24), there is a delay

of a fraction of a second
between the previous record
stop-point and the Dissolve
start-point. This is normal,
but this slight delay becomes
especially noticeable when
shooting fast-moving subject
or during rapid panning.

10.

•Set the TV to the mode or

channel appropriate for video
playback (

pg. 52 – 55).

•Close the cassette's cover

(

pg. 12).

11.

•Select “5S” or “5SD” in the

System Menu (

pg. 32).

12.

•Disengage the Squeeze

mode (

pg. 29).

13.

•Wait until the Picture Wipe

or Dissolve effects are
completed (

pg. 35).

•Change the setting of either

the System Menu or the
Power Dial (

pg. 31).

•Do not attempt to take a

Snapshot when performing
Digital Zoom (

pg. 26,

30).

14.

•Set the Power Dial to “

”

(

pg. 17).

15.

•Turn off Sepia and Mono-

tone (

pg. 40).

16.

•Turn off Sepia, Monotone or

Slow before adding
Dissolve to a scene
transition (

pg. 40).

•Make sure that the Squeeze

mode in the Recording
Menu is set to “OFF”
(

pg. 29).

•Make sure you have

selected the P.AE/Effects you
want before starting editing
(

pg. 40).

17.

————

CONTINUED ON NEXT PAGE

Summary of Contents for GR-DV808

























































































Search results

Summary of Contents for GR-DV808

Reviews:

Related manuals for GR-DV808

Brands by name

Popular brands

JVC GR-DV808, Instructions Manual

Search results

Summary of Contents for GR-DV808

Reviews:

Related manuals for GR-DV808

Brands by name

Popular brands