JVC GR-D91, Instructions Manual

Page: 15 / 56

EN
15
6
5 7
8
% &
4
u
TAPE PLAYBACK
Blank Search
Helps you find where you should start recording in the
middle of a tape to avoid time code interruption
(
墌
pg. 14).
1
Load a tape (
墌
pg. 9).
2
Set the VIDEO/DSC Switch
4
to “VIDEO”, then set
the Power Switch
u
to “PLAY” while pressing down the
Lock Button
y
located on the switch.
3
Press BLANK SEARCH
*
.
• “BLANK SEARCH”
Q
appears and the camcorder
automatically starts reverse or forward shuttle search,
then stops at the spot which is about
3 seconds of tape before the beginning of the
detected blank portion.
To cancel Blank Search midway . . .
..... press
5
5
.
NOTES:
●
In step 3 , if the current position is at a blank portion the
camcorder searches in the reverse direction, and if the
current position is at a recorded portion the camcorder
searches in the forward direction.
●
Blank Search does not work if “HEAD CLEANING
REQUIRED. USE CLEANING CASSETTE” has appeared
with the tape.
●
If the beginning or end of the tape is reached during
Blank Search, the camcorder stops automatically.
●
A blank portion which is shorter than 5 seconds of tape
may not be detected.
●
The detected blank portion may be located between
recorded scenes. Before you start recording, make sure
there is no recorded scene after the blank portion.
NOTES:
●
If Stop mode continues for 5 minutes when power is
supplied from a battery, the camcorder shuts off
automatically. To turn on again, set the Power Switch
u
to “OFF (CHARGE)”, then to “PLAY”.
●
The playback picture can be viewed in the LCD monitor,
viewfinder or on a connected TV (
墌
pg. 16).
●
You can also view the playback picture on the LCD
monitor with it flipped over and pushed against the
camera body.
●
LCD monitor/viewfinder indications:
• When power is supplied from a battery: the “
”
battery pack remaining power indicator is displayed.
When power is supplied from an AC outlet: “
” does
not appear.
• During Stop mode, none of the indications are
displayed.
●
When a cable is connected to the AV connector, the
sound is not heard from the speaker.
●
If still playback continues for more than about 3 minutes,
the camcorder’s Stop mode is automatically engaged.
●
When
4
/
6
7
is pressed to engage still playback, the
image may not pause immediately while the camcorder
stabilizes the still image.
Speaker
*
u
y
1 GR-D91US EN 12-16 02.11.6, 2:20 PM 15