JVC GR-D770AG, Instruction Manual

Page: 15 / 52

EN
15 GETTING STARTED
MasterPage: Start_Right
GETTING ST
AR
TED
The date/time is recorded onto the tape at all
times, but its display can be turned on or off.
(
pg. 34, 35)
Perform steps
1
–
3
in “Language Settings”
( pg. 14).
1
Select “DISPLAY”, press SET or
2
.
2
Select “CLOCK ADJ.”, press SET or
2
.
3
Select the desired date display format,
press SET or
2
.
●
Repeat this step to input time display format
(Select from “24h” or “12h”), month, date, year,
hour and minutes.
4
Press MENU .
Press 1 whenever you want to return to the
previous menu screen/setting.
1
Set the Power Switch to “REC” while
pressing down the Lock Button located on the
switch.
2
Make sure the LCD monitor is closed and
locked. Pull out the viewfinder fully.
3
Turn the Dioptre Adjustment Control until
the indications in the viewfinder are clearly
focused.
CAUTION:
When retracting the viewfinder, take care not to
pinch your fingers.
Perform steps
1
–
3
in “Language Settings”
( pg. 14).
●
To adjust the brightness of the viewfinder,
pull out the viewfinder fully and set
“PRIORITY” to “FINDER” (
pg. 34).
1
Select “DISPLAY”, press SET or
2
.
2
Select “BRIGHT”, press SET or
2
.
3
Select the appropriate brightness, press
SET or
2
.
4
Press MENU .
Press 1 whenever you want to return to the
previous menu screen/setting.
To attach the
camcorder to a tripod,
align the direction stud
and screw to the
mounting socket and
stud hole on the
camcorder. Then
tighten the screw
clockwise.
●
Some tripods are not
equipped with studs.
Date/Time Settings
Viewfinder Adjustment
CLOCK ADJ.
DATE. MONTH. YEAR 24h
21 : 38 AM
11. 09. 2007
1
Select
2
SET
Dioptre Adjustment Control
Example:
Brightness Adjustment Of The
Display
Tripod Mounting
BRIGHT
–
0
1
Select
2
SET
GR-D770AG_EN.book Page 15 Tuesday, December 5, 2006 1:47 PM