EN
25
MENUS FOR DETAILED ADJUSTMENT
MasterPage: Start_Right
In the following pages,
[ ]
refers to Factory
preset settings.
FUNCTION
The following menu settings can be changed
only when the Power Switch is set to
“REC”
.
pg. 31), “Wipe or Fader Effects”
pg. 32), “Program AE, Effects and Shutter
Effects”
pg. 32), “Program AE, Effects and Shutter
Effects”
pg. 30), “Exposure Control”
pg. 31), “White Balance Adjustment”
pg. 32), “Program AE, Effects and Shutter
Effects”
CAMERA
The following menu settings can be changed
only when the Power Switch is set to
“REC”
.
[28X]
: When set to “28X” while using Digital
Zoom, the zoom magnification will reset to 28X
since Digital Zoom will be disengaged.
56X
: Allows you to use the Digital Zoom. By
digitally processing and magnifying images,
zooming is possible from 28X
(the optical zoom
limit), to a maximum of 56X digital magnification.
800X
: Allows you to use the Digital Zoom. By
digitally processing and magnifying images,
zooming is possible from 28X (the optical zoom
limit), to a maximum of 800X digital
magnification.
[OFF]
: Disables the function.
ON
: When the distance to the subject is less
than 1 m, set “TELE MACRO” to “ON”. You can
shoot a subject as large as possible at a
distance of approx. 40 cm. Depending on the
zoom position, the lens may go out of focus.
OFF
: Disables the function.
[ON]
: To compensate for unstable images
caused by camera-shake, particularly at high
magnification.
NOTES:
●
Accurate stabilisation may not be possible if hand
shake is excessive, or depending on the shooting
condition.
●
Switch off this mode when recording with the
camcorder on a tripod.
●
DIS cannot be activated when
“NIGHT”
in
“PROGRAM AE”
, or
“STROBE”
in
“EFFECT”
is
selected, or when
LIGHT
is set to on or when
SNAPSHOT
is pressed.
OFF
: Allows you to shoot dark scenes with no
picture brightness adjustment.
[AGC]
: The overall appearance may be grainy,
but the image is bright.
AUTO
: The shutter speed is automatically
adjusted. Shooting a subject in low or poor
lighting at slow shutter speed provides a brighter
image than in the AGC mode, but the subject’s
movements are not smooth or natural. The
overall appearance may be grainy. While the
shutter speed is being automatically adjusted,
“
” is displayed.
[OFF]
: Disengages the function.
ON
: Helps cut down on noise created by
wind. The “
” indicator appears. The quality of
the sound will change. This is normal.
Recording Menus
WIPE/FADER
PROGRAM AE
EFFECT
EXPOSURE
W. BALANCE
SHUTTER
ZOOM
TELE MACRO
DIS
GAIN UP
WIND CUT