EN
27
MENUS FOR DETAILED ADJUSTMENT
MasterPage: Start_Right
SYSTEM
The
“SYSTEM”
functions which are set when the
Power Switch is set to
“REC”
are also applied
when the Power switch is set to
“PLAY”
.
[ENGLISH] / FRANCAIS / ESPAÑOL /
ITALIANO / NEDERLANDS
The language setting can be changed.
(
OFF
: Even though not heard while shooting,
shutter sound is recorded on the tape.
[ON]
: A melody sounds when any operation is
performed. It also activates the shutter sound
effect. (
[LCD]
: The image is displayed on the LCD
monitor when the viewfinder is pulled out while
the LCD monitor is opened.
FINDER
: The image is displayed in the
viewfinder when the viewfinder is pulled out
while the LCD monitor is opened.
OFF
: Automatic demonstration will not take
place.
[ON]
: Demonstrates certain functions such as
Wipe/Fader and Effect, etc., and can be used to
confirm how these functions operate.
Demonstration starts in the following cases:
●
When the Menu Screen is closed after “DEMO
MODE” is turned “ON”.
●
With “DEMO MODE” set to “ON”, if there is no
operation for about 3 minutes after the Power
Switch is set to
“REC”
.
●
Performing any operation during the
demonstration stops the demonstration
temporarily. If no operation is performed for more
than 3 minutes after that, the demonstration will
resume.
NOTES:
●
If a cassette is in the camcorder, the demonstration
cannot be turned on.
●
“DEMO MODE” remains “ON” even if the
camcorder power is turned off.
[CANCEL]
: Does not reset all settings to the
factory-preset.
EXECUTE
: Resets all settings to the factory-
preset.
VTR
The settings below are effective only for video
playback .
SOUND L/R and NARRATION
During tape playback, the camcorder detects the
sound mode in which the recording was made,
and plays the sound back. Select the type of
sound to accompany your playback picture.
[OFF]
: Original sound is output on both “L” and
“R” channels in stereo.
ON
: Dubbed sound is output on both “L” and “R”
channels in stereo.
MIX
: Original and dubbed sounds are combined
and output in stereo on both “L” and “R”
channels.
[STEREO
]
: Sound is output on both “L” and
“R” channels in stereo.
SOUND L
: Sound from the “L” channel is
output.
SOUND R
: Sound from the “R” channel is
output.
LANGUAGE
MELODY
PRIORITY
DEMO MODE
CAM RESET
Playback Menus
NARRATION
SOUND L/R