background image

GETTING STARTED

18 

EN

MasterPage: Left

The camcorder needs to be powered up to load 
or eject a cassette. 

1

Slide and hold 

OPEN/EJECT

 in the direction 

of the arrow, then pull the cassette holder cover 
open until it locks. The cassette holder opens 
automatically.

Do not touch internal components.

2

Insert or remove a tape and press “PUSH” to 

close the cassette holder. 

Be sure to press only the section labelled “PUSH” 
to close the cassette holder; touching other parts 
may cause your finger to get caught in the 
cassette holder, resulting in injury or product 
damage.

Once the cassette holder is closed, it recedes 
automatically. Wait until it recedes completely 
before closing the cassette holder cover.

When the battery pack’s charge is low, you may 
not be able to close the cassette holder cover. Do 
not apply force. Replace the battery pack with a 
fully charged one or use AC power before 
continuing.

3

Close the cassette holder cover firmly until it 

locks into place.

To protect valuable recordings

Slide the erase protection tab on the back of the 
tape in the direction of “SAVE”. This prevents the 
tape from being recorded over. To record on this 
tape, slide the tab back to “REC” before loading 
it.

NOTES:

If you wait a few seconds and the cassette holder 
does not open, close the cassette holder cover 
and try again. If the cassette holder still does not 
open, turn the camcorder off then on again.

If the tape does not load properly, open the 
cassette holder cover fully and remove the 
cassette. A few minutes later, insert it again.

When the camcorder is suddenly moved from a 
cold place to a warm environment, wait a short 
time before opening the cassette holder cover. 

Loading/Unloading A Cassette

Make sure the window side 
is facing out.

Cassette holder 
cover

Cassette holder 

PUSH

OPEN/EJECT

Erase 
protection tab

GR-D650E-640E.book  Page 18  Tuesday, May 30, 2006  11:31 AM

Summary of Contents for GR-D640E

























































Reviews: