52
EN
INDEX
(cont.)
P
FINE 12
REC SP
30MIN
444
4
S . LX
T30
01
MWB
NORM
5MIN
1 4S
LENS COVER
PAUSE
25.12. 98
22 : 50 : 00
MERRY CHRISTMAS
TAPE END
TWILIGHT
1
2
4
3
6 7
5
^
&
*
9
0
#
%
$
)
(
q
8
!
@
Viewfinder Indications
#
• Record-Standby Mode Indicator ..........
Z
pg. 12
• Lens Cover Warning:
LENS COVER ......................................
Z
pg. 13
$
Instant Title Display ...............................
Z
pg. 22
%
Date/Time/Character Display .................
Z
pg. 17
^
Battery Pack Remaining Power Indicator
Changes as follows according to the battery pack’s
remaining power level: “
”.
When the power is almost gone, the indicator
“
” blinks (battery power warning), then the
unit shuts off. Replace the battery pack with a fully
charged one.
Note: The symbol containing 3 darkened squares
—
— does not necessarily mean that the
battery pack is fully charged.
&
Focus Indicator ......................................
Z
pg. 29
*
Exposure Control Level Counter .............
Z
pg. 27
(
White Balance Mode Indicator ..............
Z
pg. 30
)
Clock Battery Warning
Blinks for approx. 10 seconds when the power is
turned on. This display also blinks when the clock
(lithium) battery is either not installed or has
discharged. Install or replace the old battery with a
new one (
Z
pg. 6).
q
• Tape End Display: TAPE END ..............
Z
pg. 13
Appears when the end of the tape is reached
during playback, recording or fast-forward.
• Condensation Warning:
When this indication appears, all functions except
tape eject and power on/off are disabled. Turn the
unit off (without removing the power source) for a
few hours, and when you turn it on again the
indication should disappear.
1
Cassette Warning/
Tape Remaining Time ............................
Z
pg. 13
When no cassette is inserted: the cassette (
)
warning blinks.
When Erase Protection tab is not in the position that
allows recording: the cassette (
) warning lights.
Otherwise, the tape remaining time is displayed and
the tape remaining time warning blinks when the
tape is about to reach its end.
When the Power Switch is set to “PLAY” and a tape
is loaded: the cassette (
) mark is displayed
regardless of the Erase Protection tab’s position.
2
Recording Mode (SP/LP) Indicator ..........
Z
pg. 8
3
Multi-Function Control
Indication .......................................
Z
pg. 20 – 22
Displayed when any of the buttons located on the
Multi-Function Control is pressed. The indication
disappears within approx. 2 seconds.
4
,
9
Programme AE Indicator ...................
Z
pg. 18
Displayed at
4
for approx. 1 second when the
Select Dial is switched from one position to another.
Then only the indicator remains at
9
.
4
,
0
Fade/wipe-Standby ............................
Z
pg. 20
Displayed at
4
for approx. 2 seconds when the
Fade/Wipe is switched from one function to another
by pressing the EFFECT button. Then only the
indicator remains at
0
.
5
Super LoLux Indicator ............................
Z
pg. 21
6
Tape Length Indicator ............................
Z
pg. 8
7
Zoom Indicator Bar ................................
Z
pg. 14
8
Recording Indicator ...............................
Z
pg. 12
!
Picture Stabilizer Indicator .....................
Z
pg. 15
@
Interval Timer/Recording Time
Indicator ................................................
Z
pg. 32
