JVC GR-AX780 Instructions Manual Download

Page: 36 / 56

PLAYBACK

Features (cont.)

FEATURE:

Still Playback

PURPOSE:

To pause during playback.

OPERATION:

1) Press PLAY/PAUSE during

playback.

2) To resume normal playback, press

PLAY/PAUSE again.

NOTE:

Noise bars appear and pictures may
become monochrome during Still
Playback. This is normal.

FEATURE:

Shuttle Search

PURPOSE:

To allow high-speed search in either
direction.

OPERATION:

Forward Search

1) Press FF during playback.

Reverse Search

1) Press REW during playback.

NOTE:

Noise bars appear and pictures may
become monochrome or darken in
Shuttle Search. This is normal.

FEATURE:

Counter Memory Function

PURPOSE:

To make it easier to locate a specific
tape segment.

OPERATION:

1) Press COUNTER R/M and hold for

more than 1 second. The counter
resets to “0:00:00”.

2) Press COUNTER R/M for less than

1 second. “M” appears.

3) After recording or playback, press

STOP, then REW. The tape
automatically stops at or close to
0:00:00.

4) Press PLAY/PAUSE to start

playback.

NOTES:

●

The counter memory functions in
the Fast-Forward and Rewind
modes.

●

To disable Counter Memory
Function, press COUNTER R/M for
less than 1 second so the “M”
disappears.

REW

STOP

COUNTER R/M

PLAY/PAUSE

Summary of Contents for GR-AX780
























































Search results

Summary of Contents for GR-AX780

Reviews:

Related manuals for GR-AX780

Brands by name

Popular brands

JVC GR-AX780, Instructions Manual

Search results

Summary of Contents for GR-AX780

Reviews:

Related manuals for GR-AX780

Brands by name

Popular brands