45
APS ON
AUTO
10
:
24
25
. 12.
97
Merry Christmas
TAPE END
– 05
MWB
Disp.
REC SP
Sepia
18min
T30
1min
1/2s
INDEX
P AUSE
7
8
9
0
1
2
5 6
%
&
^
*
(
)
q
!
#
$
@
w
4
3
INDEX
Viewfinder
Viewfinder Indications
%
Battery Pack Remaining Power Indicator
Changes as follows according to the battery pack’s
remaining power level: “
”.
When the power is almost gone, the indicator
blinks, then the unit shuts off. Replace the
battery pack with a fully charged one.
(Note: The symbol containing 3 darkened
squares —
— does not necessarily mean
that the battery pack is fully charged.)
^
Focus Indicator ...................................
Z
pg. 18
&
Exposure Level Indicator .....................
Z
pg. 20
*
White Balance Mode Indicator ...........
Z
pg. 25
(
Menu Setting Change Indicator ...........
Z
pg. 26
)
Index Code Marking ...........................
Z
pg. 39
q
Clock Warning
Once the power is turned on and the indicator
blinks for about 10 seconds, perform the date
and time settings (
Z
pg. 9). After setting is
complete, turn the power off and disconnect the
power source. If you re-connect it and turn the
power on and the indicator is blinking, that
means that the clock (lithium) battery is either
not installed or has discharged. Install, or replace
the old battery with, a new one (
Z
pg. 8).
w
• Tape End Display: TAPE END ...........
Z
pg. 12
Appears when the end of the tape is reached
during playback, recording or fast-forward.
• Condensation Warning:
When this indication appears, all functions are
disabled. Turn the unit off (without removing
the power source) for a few hours, and when
you turn it on again the indicator should
disappear.
1
Cassette Warning/Remaining
Tape Time ...........................................
Z
pg. 12
When no cassette is inserted: the Cassette (
)
Warning blinks.
When Erase Protection tab is not in the position that
allows recording: the Cassette (
) Warning lights.
Otherwise, the Remaining Tape Time is displayed.
2
Recording Mode (SP/LP) Indicator ......
Z
pg. 10
3
,
8
PROGRAM AE Indicator ................
Z
pg. 16
Displayed at
3
for approx. 1 second when the
PROGRAM AE select dial is switched from one
position to another. Then only the indicator
remains at
8
.
3
,
9
Fade/Wipe Standby Indicator ........
Z
pg. 21
Displayed at
3
for approx. 2 seconds when the
Fade/Wipe is switched from one function to
another by pressing the SET button. Then only
the indicator remains at
9
.
4
Program Manager Function Indication ...
Z
pg. 21
Appears when the PROGRAM AE select dial is
set to any position other than AUTO LOCK.
5
Tape Length Display ...........................
Z
pg. 10
6
Zoom Indicator bar .............................
Z
pg. 13
7
Recording Indicator ............................
Z
pg. 12
0
Picture Stabilizer Indicator ..................
Z
pg. 20
!
Interval Time/Recording
Time Indicator .....................................
Z
pg. 28
@
•Record–Standby Mode Indicator ......
Z
pg. 12
•Lens Cover Warning: LENS COVER ..
Z
pg. 12
#
Instant Title Display ............................
Z
pg. 22
$
Date/Time Character Display ..............
Z
pg. 24
