JVC GR-AX761 Instructions Manual Download Page 11

Page: 11 / 56

X I T

REC MODE

MENU Wheel

Power Switch

REC MODE Menu

Recording mode
indicator

Recording Mode Setting

Set the tape recording mode depending on your preference.

Set the Power Switch to “

”. The power lamp

comes on.

Press the

MENU

Wheel in. The Menu Screen

appears.

Rotate the

MENU

Wheel to select “ TO SYSTEM

MENU” and press it to display SYSTEM MENU.

Rotate the

MENU

Wheel to select “REC MODE” and

press it. The REC MODE Menu appears. Select “SP”
or “EP” by rotating the

MENU

Wheel and press it.

The Menu Screen reappears with the highlight bar on
“ RETURN”. Press the

MENU

Wheel in to close the

Menu Screen.
•“EP” (Extended Play) is more economical, providing

three times the recording time.

NOTE:

If the recording mode is switched during recording, the
playback picture will be blurred at the switching point.

Display

Summary of Contents for GR-AX761
























































Search results

Summary of Contents for GR-AX761

Reviews:

Related manuals for GR-AX761

Brands by name

Popular brands

JVC GR-AX761, Instructions Manual

Search results

Summary of Contents for GR-AX761

Reviews:

Related manuals for GR-AX761

Brands by name

Popular brands