EN
31
Set to “
”.
TBC Button
PLAYBACK
Features
COUNTER R/M Button
Rewind (
2
) Button
Fast-Forward (
3
) Button
Play/Pause (
4
/
6
) Button
Stop (
5
) Button
Tracking:
Eliminates noise bars that appear on-screen
during playback. Factory-preset is Auto Tracking.
To activate Manual Tracking:
1)
Press the
TRACKING
Wheel for approx. 2 seconds.
“MT” appears.
2)
Rotate the
TRACKING
Wheel so that the noise bars
disappear.
●
To return to Auto Tracking, press the
TRACKING
Wheel
for approx. 2 seconds or set the Power Switch to “OFF”
and then ”
” again. “AT” blinks. When Auto
Tracking finishes, the indication disappears.
●
When noise bars appear during playback, the
camcorder enters the Auto Tracking mode and “AT” is
displayed.
●
Manual Tracking may not work with tapes recorded on
other VCRs or camcorders.
TBC (Time Base Corrector):
Removes jitter from
fluctuating video signals to deliver a stable picture even
with old tapes. Factory-preset: TBC is engaged.
To activate/release the TBC mode, press
TBC
during
playback for more than 1 second. When the TBC mode is
activated, “TBC” is displayed.
Counter Memory Function:
Makes it easier to
locate a specific tape segment.
1)
Press
COUNTER R/M
and hold for more than 1 second.
The counter resets to “0:00:00”.
2)
Press
COUNTER R/M
for less than 1 second.
“M” appears.
3)
After recording or playback, press
5
, then
2
. The tape
automatically stops at or close to 0:00:00.
4)
Press
4
/
6
to start playback.
●
The counter memory functions in the Fast-Forward and
Rewind modes.
●
To disable the Counter Memory Function, press
COUNTER R/M
for less than 1 second so that “M”
disappears.
TRACKING
Wheel
For other notes,
墌
pg. 42
