8
Connections
(cont.)
To stereo audio
input terminals
To RS-232C
terminal
To RS-485
output
terminal
To RS-485 input
terminal
External control input
terminal of other
equipment
(See page 17.)
St
er
eo audio
cable
RJ-45 cable
RJ-45 cable
RS-232C cable
External equipment used to
control the monitor
(See pages 17 to 19.)
To external
speakers
(See page 6.)
R
L
CAUTION
• Before making any connections, turn off all the equipment.
• DO NOT connect the power cord until all connections are completed.
• Use a cord whose plugs correctly match the terminals on this monitor and the equipment.
• Plugs should be firmly inserted; poor connections could cause noise.
• When unplugging a cord, be sure to grasp it’s plug and pull it out.
• Refer also to the user manual of each piece of equipment.
To stereo audio
output terminals
To video
output
terminal
(BNC)
To S-video
output
terminal
To audio
output
terminal
To RGB
output
terminal
To digital
output
terminal
D
-sub 15 pin cable
DV
I-
D cable
St
er
eo mini jack cable
S-
video cable
BNC cable
St
er
eo audio
cable
R
L
To component video or RGB
*
output terminal (BNC)
D
-sub 15 pin
– BNC con
version
cable
or
Red
Blue
Gr
een
Synchr
oniz
ed
sig
nal (H)
Synchr
oniz
ed
sig
nal (
V
)
Connect the VIDEO IN A OUT terminal to the video input terminal of another monitor, etc.
CAUTION
• Since the IN terminal and OUT terminal are loop-through terminals, the devices connected to the OUT terminal should be correctly
terminated. Otherwise, pictures become abnormally bright or the display screen gets affected abnormally.
When all the connections
are completed
Amplifier, etc.
Playback component such as a VCR
Playback component such as a PC or VCR
*
For component video connection, connect only to the green, blue, and red terminals.
Power cored
(supplied)
To wall outlet
GM-H40L2UA_resize-2.indd 8
GM-H40L2UA_resize-2.indd 8
06.7.28 1:44:16 PM
06.7.28 1:44:16 PM