17
ENGLISH
Changing the aspect ratio
Each time you press the button, the aspect ratio changes as follows:
REGULAR
Displays at conventional 4:3 aspect ratio.
FULL
Enlarges the picture of 4:3 aspect ratio horizontally.
• For the picture of 16:9 aspect ratio, the aspect ratio is not changed.
ZOOM
Enlarges the picture of 4:3 aspect ratio vertically and horizontally at the
same ratio.
PANORAMIC
Enlarges the picture of 4:3 aspect ratio horizontally to the extent that the
picture does not look abnormal.
<PC input ONLY>
REAL DOT
Displays center portion of the original picture input
from the computer (SXGA or UXGA signals) without
changing the number of pixels. (Some of the
picture will be cut off .)
NOTE
• For some signals, the aspect ratio cannot be changed or some modes cannot be selected.
• When using the buttons on the main unit for changing the aspect ratio, use the main
menu (see “SIZE SETTING” on page 21).
Displaying the current status
The information of the current input is displayed on the screen.
*
1
When Input C, D, E, or F is selected with an optional
input card inserted, the type of the card appears. When
no card is inserted, “NO CARD” appears.
*
2
When no signal is being input, “NO SYNC” appears.
When a signal this monitor does not support is being
input, “Out of range” appears.
NOTE
• When “STATUS DISPLAY” on the main menu is set to “ON” (see page 25), the status is also displayed in the following
cases:
– When you turn on the monitor,
– When you change inputs, or
– When you change signal types.
I N P U T A
V I D E O
N T S C
Current input
Input type*
1
Input signal format*
2
Ex. For SXGA signals
Ex. For UXGA signals
06-40_GM-H40L1G_E-f.indd 17
06-40_GM-H40L1G_E-f.indd 17
05.10.6 1:24:46 PM
05.10.6 1:24:46 PM
