31
SET UP for Input Signals
COLOR SYSTEM / A
U
T
O
Select SIGNAL from the
“SET UP
” menu during VIDEO (S-VIDEO) input
signal mode. (
“SIGNAL [VIDEO]
” menu is displayed.)
Press to select the
“COLOR SYSTEM
” or
“AU
T
O
”.
SELECT
SET UP
SIGNAL
COMPONENT/RGB-IN SELECT
RGB
OSD LANGU
A
G
E
ENGLISH
(US
)
RETURN
Mode
Color system
A
U
T
O
(4:3)
Press to select each functions.
Function
Set the color system to match the input signal.
If set to
“AU
T
O
”, the color system
is deter
mined automatically
.
Set to
“NORMAL
” to vie
w 4:3 images in an unchanged f
o
rmat when A
U
T
O
is
selected. If you would like to view 4:3 images in
“Just
” format, set to
“JUST
”.
AUT
O P
A
L
SECAM M NTSC NTSC
CHANGE
SELECT
3D
Y/C FIL
TER
(NTSC
)
COLOR SYSTEM
AUT
O
(4:3
)
ON
AUT
O
NORMAL
SIGNAL
[ VIDEO
]
RETURN
Press
(store) button
If the picture ima
g
e
becomes unstab
le:
With the system set on A
uto
, under conditions of
lo
w le
v
el or noisy input signals the image ma
y in
rare cases become unstab
le
. Should this occur
,
set the system to match the f
o
rmat of the input
signal.
32
Select SIGNAL from the
“SET UP
” menu during RGB or PC input signal mode.
Press to select each item.
Press to adjust.
SIGNAL
[ RGB
]
SYNC
PULL-IN RANGE
H
-FREQ. kHz
V
-FREQ. Hz
H & V
NARROW
31.5
60.0
CLAMP
POSITION
SIGNAL
[ PC
]
SYNC
PULL-IN RANGE
H
-FREQ. kHz
V
-FREQ. Hz
H & V
NARROW
31.5
60.0
CLAMP
POSITION
The following operation methods are the same for both the SIGNAL [RGB]
and SIGNAL [PC].
SYNC
SYNC
H & V
SYNC
ON VIDEO
SYNC
ON G
Setting RGB sync signal setting:
Confirm that the input is set to RGB INPUT (this setting is valid only for RGB INPUT).
H&V
:
The H and
V sync signals are input from the HD/VD (BNC) connector
.
ON G:
Uses a synchroniz
ed signal on the
Video G signal, which is input
from the G (BNC) connector
.
ON VIDEO:
Compatible with the scart plug (Europe)
The composite video signal input from the VIDEO input terminal is
used by dividing the sync signals.
Sets the width for different frequencies.
(This setting is the same for both SIGNAL [RGB] and SIGNAL [PC].)
Setting PC sync signal setting:
Confirm that the input is set to PC INPUT (this setting is valid only for PC INPUT).
H&V
:
The H and
V sync signals are input from the HD/VD (BNC) connector
.
ON G:
Uses a synchroniz
ed signal on the
Video G signal, which is input from the G (BNC) connector
.
PULL IN RANGE
PULL
IN RANGE
WIDE
PULL
IN RANGE
NARROW
Displa
ys the H (Horizontal) /V (V
er
tical) frequencies.
This display is valid only for RGB input and PC input.
Display range:
Hor
iz
ontal 15.5 - 110 kHz
V
e
rtical 48 - 120 Hz
H-FREQ (kHz) /V
-FREQ (Hz)
H
-FREQ. kHz
V
-FREQ. Hz
31.5
60.0
SET UP for Input Signals
CLAMP POSITION
SIGNAL
[ COMPONENT
]
CLAMP
POSITION
Adjusts the clamp position.
The f
ollo
wing operation methods are the same f
or
“SIGNAL
” men
u dur
ing
COMPONENT
, RGB and PC input signal mode
.
Nor
mally
, these adjustments are set to appropr
iate le
v
els and, theref
ore
, do not
need to be altered.
CLAMP
POSITION
19
GD-V500PZU
