JVC GD-42X1 Instructions Manual Download Page 61

Page: 61 / 144

Troubleshooting

No sound.

●

Check the speaker cord connection. (

➔

page 05)

●

Press the MUTING button.

●

Check the amplifier connection.

●

When “AMP” is selected under “Speaker”, the sound is output from the

amplifier, and not from the speakers of the monitor. (

➔

page 13)

No picture from HDMI devices.

●

Select the correct input on the monitor.

●

Use a cable marked with the HDMI logo.

●

Please use a High Speed HDMI

Cable. High Speed HDMI

Cables are

tested to carry an HD signal up to 1080p and higher. (

➔

page 09)

No sound from HDMI devices.

●

Set “Input-1 Audio” properly. (

➔

page 37)

Cannot control HDMI CEC devices.

●

Set “Control with HDMI” to “On”. (

➔

page 36)

●

Some devices may not accept controls by HDMI CEC.

Cannot operate the product using the buttons on the monitor.

●

Set “Front Panel Lock” to “Off”. (

➔

page 29)

Picture from a computer is strange.

●

Adjust the items under “PC Setting”. (

➔

page 34)

The source indication stays on the display.

●

Turn on the selected external device and start playback.

●

When no signal is input, you cannot turn off the source indication.

The picture and the sound do not synchronize.

●

Adjust “Lip Sync”. (

➔

page 27)

●

Adjust “Picture Delay Time”. (

➔

page 25)

Colours are strange.

●

Adjust the items under “Picture”. (

➔

page A-2)

●

Load one of the picture presets to discard the current settings and

apply the selected preset. (

➔

page A-3)

GD42X1̲inst̲us.indb 43

09.5.27 11:27:40 AM

Summary of Contents for GD-42X1

















































































































































Search results

Summary of Contents for GD-42X1

Reviews:

Related manuals for GD-42X1

Brands by name

Popular brands

JVC GD-42X1, Instructions Manual

Search results

Summary of Contents for GD-42X1

Reviews:

Related manuals for GD-42X1

Brands by name

Popular brands