background image

EN 

7

Four high-quality still image shooting modes

1. 6M Pro-Still (Pixel Shift Mode) (

Z

 pg. 46)

This mode collects twice as much image data by
using two exposures (with the CCD shifted one
pixel for the second exposure), resulting in an
image consisting of 6 million pixels, or twice as
many in normal mode.

2. DR Pro-Still (Wide Range Mode) (

Z

 pg. 47)

This mode uses two exposures, one with the
exposure adjusted for the dark portions of the
image, and one with the exposure adjusted for the
bright portions of the image. By using the image
data from both exposures, it is possible to achieve a
wide dynamic range that was previously impossible.
This mode avoids pictures where part of the image
is blacked out or whited out, which occurs easily
with conventional digital cameras.

3. NR Pro-Still (Noise Reduction Mode) (

Z

 pg. 48)

This mode uses several exposures to collect a large
amount of image information, then extracts the
signal components and eliminates the noise
components. This mode eliminates electronic noise,
which occurs easily with conventional digital
cameras.

4. Shooting Film (Film Copy Mode) (

Z

 pg. 50)

This mode allows you to copy photos of images
from developed 35 mm film with the provided film
copying adapter. You can print them with special
effects or a calendar with the optional printer.

Video Shooting

This feature is useful, if you want to send a short
video by e-mail.

Collage shooting

This feature allows you to combine a subject with a
previously photographed background with a simple
operation.

MAJOR FEATURES

Using the SmartMedia™ card* increases
photo capacity

This unit is compatible with SmartMedia™ cards*,
which can be used to increase the number of
pictures that can be taken.
* “SmartMedia™ card” (which is described as

“Memory card” in this instruction manual) is a
trademark of Toshiba Corporation.

Before taking important photos

When you need to take an important photo,
always take a test photo first and confirm that the
camera is operating normally.

Memory card is not installed when this unit is
purchased. Be sure to install a Memory card
before taking photos.

Before shooting, always confirm how much
memory is remaining from the memory card.

We cannot bear any responsibility for an inability
to shoot, record, or playback material normally in
the event of a problem with a digital video
camera, Memory card, etc.

Store backups of important photos on a personal
computer, etc. We cannot bear any responsibility
for pictures stored in memory that are lost or
altered.

Copyrights

You may only use material that you photograph or
record with this digital camera for your own
personal use, and not in any way that infringes on
the copyrights of a third party. (Note that some
performances and exhibits have restrictions against
photography, even if only for your personal use.)

Summary of Contents for GC X 3

































































































Reviews: