background image

EN 

53

4

1

2

OFF

M

4

SET

V

4,5

PLAYBACK

Video Playback

You can watch the recorded video on the camera's LCD screen.

1

Turn the Power dial to “

B

”.

•Hold the Lock button down while turning the

Power dial.

2

Select “VIDEO PB” with the MODE switch.

•“VIDEO PB” appears on the LCD panel.
•The first frame of the video (which has been

most recently recorded) appears on the LCD
screen.

3

Press the DISPLAY button to switch to an
indexed display.

4

Press the 

r

 

t

 

w

 

e

 button to select the video,

and then press the EXE button.

•The still image of the selected video appears.

5

Press the EXE button to start playback.

•Playback of the video starts.
•To stop playback, press the EXE button again.
•To select and play back another video, press

the DISPLAY button while playback is in stop
mode. The indexed display will appear.

NOTES:

The camera may not be able to play back a video
recorded by other models of camera.

The camera expands and plays back data that was
compressed and stored in a memory card. The
data format is our own proprietary format.

The image may have a mosaic appearance.

When playing back a video that is shorter than 2
seconds, the video is displayed as a still image.
This not a malfunction.

To hear the sound, use the Video Player or JVC
Video Decoder. (

Z

 pg. 75, 82) Sound will not be

reproduced on the camera itself.

VIDEO PLAY

3

Summary of Contents for GC X 3

































































































Reviews: