JVC EXAD KD-SHX855 Instructions Manual Download Page 6

Page: 6 / 58

ENGLISH

Control panel —

KD-SHX855

Parts identification

(angle) button

Adjusts the control panel angle.

(eject) button

Ejects the disc.

DISP (display) button

Changes the information shown on the

display.

(standby/on/attenuator)/

button
•

Turns on and off the power and also

attenuates the sound.

•

Confirms the selection while operating

the menus.

Volume control dial

Adjusts the volume level.

SOURCE button

Selects the source.

(

) buttons

• For FM/AM:

Searches for stations if

pressed, or skips frequencies after pressed
and held.

• For discs or an SD card:

Changes the

tracks if pressed, or fast-forwards or
reverses the track if pressed and held.

•

For menu operations:

Selects the menu

items/values.

Remote sensor

DO NOT expose the remote sensor on
the control panel to strong light (direct
sunlight or artificial lighting).

Color display window

BAND/BACK button

• For FM/AM:

Selects the band.

•

For menu operations:

Goes back to the

previous screen.

PICT (picture) button

Displays the PICT menu.

MENU button

Displays the MENU screen.

Reset button

(up) /

∞

(down) buttons

• For FM/AM:

Changes the preset stations

if pressed, or displays Preset Station List
if pressed and held.

• For MP3/WMA discs or an SD card:

Changes the folders if pressed, or displays
Disc List (only for “CD-CH”) or Folder
List if pressed and held.

•

For menu operations:

Selects the menu

items/values.

(control panel release) button

PICT

SOURCE

DISP

BACK

BAND

EN02-07_KD-SHX855[U]f.indd 6

05.4.8 8:56:21 PM

Summary of Contents for EXAD KD-SHX855



























































Search results

Summary of Contents for EXAD KD-SHX855

Reviews:

Related manuals for EXAD KD-SHX855

Brands by name

Popular brands

JVC EXAD KD-SHX855, Instructions Manual

Search results

Summary of Contents for EXAD KD-SHX855

Reviews:

Related manuals for EXAD KD-SHX855

Brands by name

Popular brands