JVC EXAD KD-BT1 Instructions Manual Download Page 50 | Manualshive

Page: 50 / 54

background image

ENGLISH

48

Symptom

Remedy/Cause

USB device

• Correct characters are not displayed (e.g.

album name).

This unit can only display letters (capital: A – Z,
small: a – z), numbers, and a limited number of symbols.

• While playing a track, sound is sometimes

interrupted.

The tracks have not been properly copied into the USB
device. Copy tracks again into the USB device, and try
again.

• The sound is interrupted or skipped during

playback of a USB device.

• Turn off, then turn on the unit.
• (When the sound is not yet restored,) connect the device

again.

Bluetooth

• Bluetooth device does not detect the unit.

The unit can be connected with one Bluetooth cellular
phone and one Bluetooth audio device at a time.
While connecting a device, this unit cannot be detected
from another device. Disconnect currently connected
device and search again.

• The unit does not detect the Bluetooth device. • Check the Bluetooth setting of the device.

• Search from the Bluetooth device. After the device

detects the unit, select “Open...” on the unit to connect
the device. (See page 17.)

• The unit does not make pairing with the

Bluetooth device.

• Enter the same PIN code for both the unit and target

device. If the PIN code of the device is not indicated on
its instructions, try “0000” or “1234.”

• Select the device name from “Special Device,” then try to

connect again. (See page 18.)

• Try to pair/connect from the Bluetooth device.
• Check if your Bluetooth device support the respective

profile. (See page 16.)

• Echo or noise occurs.

Adjust the microphone unit position.

• Phone sound quality is poor.

• Reduce the distance between the unit and the Bluetooth

audio device.

• Move the car to a place where you can get a better signal

reception.

• The sound is interrupted or skipped during

playback of a Bluetooth audio device.

• Reduce the distance between the unit and the Bluetooth

audio device.

•  Disconnect the device connected for “Bluetooth Phone.”
•  Turn off, then turn on the unit.
•  (When the sound is not yet restored,) connect the device

again.

• The connected audio device cannot be

controlled.

Check whether the connected audio device supports AVRCP
(Audio Video Remote Control Profile).

EN44-51_KD-BT1_003A_f.indd 48

EN44-51_KD-BT1_003A_f.indd 48

3/6/07 10:37:45 AM

3/6/07 10:37:45 AM

«
...
48
49
50
51
52
...
»

Summary of Contents for EXAD KD-BT1























































Reviews:

No comments

Related manuals for EXAD KD-BT1

Brand: Kathrein Pages: 44

Brand: Streetwize Pages: 2

Brand: Albrecht Pages: 20

Brand: Boss Audio Systems Pages: 17

Brand: Tait Pages: 72

Brand: YBA DESIGN Pages: 54

Brand: Aria Pages: 12

Brand: RF Central Pages: 41

Miami Beach CD148

Brand: Blaupunkt Pages: 17

Brand: Aiwa Pages: 9

Brand: Onkyo Pages: 40

Rollixo Smart io

Brand: SOMFY Pages: 92

Brand: Grundig Pages: 50

Brand: Pro2 Pages: 24

TECHCONNECT TC2-HDMIW20

Brand: Vision Pages: 16

Brand: Dual Pages: 1

Brand: revoltec Pages: 2

Brand: Pyle Pages: 11

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands