JVC EXAD KD-AVX55, Instructions Manual

Page: 62 / 218

62
ENGLISH
iPod/iPhone operations
• You can control the following types of iPod/iPhone:
(A) Connected with the USB cable:
– iPod with video (5th Generation) * 1, * 2, * 3
– iPod classic
*
1,
*
2
– iPod nano * 2, * 3
– iPod nano (2nd Generation)
*
2
– iPod nano (3rd Generation) * 1, * 2
– iPod nano (4th Generation)
*
1,
*
2
– iPod touch * 1, * 2
– iPod touch (2nd Generation) * 1, * 2
– iPhone/iPhone 3G* 1, * 2
(B) Connected with the interface adapter:
– iPod with Click Wheel (4th Generation)
–
iPod mini
– iPod photo
– iPod with video (5th Generation)
–
iPod classic
– iPod nano
– iPod nano (2nd Generation)
– iPod nano (3rd Generation)
– iPod nano (4th Generation)
* 4
*
1 To watch the video with its audio, connect the iPod/
iPhone using USB Audio and Video cable (KS-U30, not
supplied).
*
2 “iPod MODE” is available, 51.
* 3 To listen to the sound in “iPod MODE,” connect the
iPod/iPhone using USB Audio and Video cable (KS-
U30, not supplied).
*
4 It is not possible to charge the battery through this
unit.
• If the iPod/iPhone does not play correctly, update
your iPod/iPhone software to the latest version.
For details about updating your iPod/iPhone, visit
<http://www.apple.com>.
• When you turn on this unit, the iPod/iPhone is
charged through the unit.
• The text information may not be displayed correctly.
• The text information scrolls on the monitor. This
unit can display up to 40 characters when using the
interface adapter and up to 128 characters when
using the USB 2.0 cable or USB Audio and Video
cable.
Bluetooth operations (KD-AVX77
only)
General
• While driving, do not perform complicated operation
such as dialing the numbers, using phone book, etc.
When you perform these operations, stop your car in
a safe place.
• Some Bluetooth devices may not be connected to
this unit depending on the Bluetooth version of the
device.
• This unit may not work for some Bluetooth devices.
• Connecting condition may vary depending on
circumstances around you.
• When the unit is turned off, the device is
disconnected.
Warning messages for Bluetooth operations
• Connection Error :
The device is registered but the connection has failed.
Use < Phone Connect > or < Audio Connect > to
connect the device again. ( 30)
• Error :
Try the operation again. If “Error” appears again,
check if the device supports the function you have
tried.
• Please Wait... :
The unit is preparing to use the Bluetooth function. If
the message does not disappear, turn off and turn on
the unit, then connect the device again (or reset the
unit).
Icons for phone types
• These icons indicate the phone type set on the device.
: Cellular phone
: Household phone
: Office
: General
: Other than above
EN_KDAVX7755[EE]f.indb 62 EN_KDAVX7755[EE]f.indb 62 09.3.27 2:56:48 PM 09.3.27 2:56:48 PM