1-22 (No.MA101)
3.3.2 Removing the switch board
(See Fig.4)
• Removing the switch board (See Fig.4)
(1) Release the lock of the connector
CN402
on the display
board in the direction of the arrow and disconnect the card
wire.
Reference:
After connecting the card wire, fix it with the spacer(H) as
before.
(2) Take out the switch board from the display unit.
3.3.3 Removing the display board
(See Fig.4)
• Prior to performing the following procedures, remove the dis-
play back panel.
Reference:
Remove the switch board as required.
(1) Release the lock of the connector
CN402
on the display
board in the direction of the arrow and disconnect the card
wire.
(2) Release the locks of the connectors (
CN421
,
CN451
) on
the display board in the direction of the arrow and discon-
nect the flexible wire.
(3) Disconnect the wire from the connector
CN471
on the dis-
play board.
(4) Bend the hooks c in the direction of the arrow.
(5) Remove the two screws
C
attaching the slider assembly.
(6) Remove the tension spring from the section
d
and remove
the slider assembly in the direction of the arrow 1.
(7) Remove the three screws
D
attaching the display board
and take out the display board from the display unit.
Reference:
After connecting the each wire, fix them with the spacer(H) as
before.
Fig.4
3.3.4 Removing the LCD module
(See Fig.5)
• Prior to performing the following procedures, remove the dis-
play back panel and display board.
Release the claws
e
in the direction of the arrow and take out
the LCD module from the display panel.
Fig.5
c
d
c
Slider assembly
Spacer(H)
CN451
Spacer(H)
Switch board
Display board
CN421
CN402
CN471
Tension spring
D
D
D
C
C
Slider assembly
1
Spacer(H)
e
LCD module
Display panel
e
e
e
Summary of Contents for EXAD KD-AV7000
Page 59: ... No MA101 1 59 ...
Page 106: ...3 46 MEMO ...