JVC EXAD KD-AV7000 Service Manual Download Page 19

Page: 19 / 107

(No.MA101)1-19

3.2.6 Removing the second wheel and R.L.S. gear

(See Figs.17 to 24)

• Remove the display drive unit and cover.

(1) Disconnect the wire from the connector

CN311

on the mo-

tor board. (See Fig.17.)

(2) Remove the screw

attaching the motor bracket (A). (See

Fig.17.)

(3) Take out the motor bracket (A), worm guide and motor to-

gether. (See Fig.17.)

(4) Remove the two screws

attaching the gear bracket as-

sembly. (See Fig.18.)

(5) Take out the gear bracket assembly with other parts from

the display drive unit.

(6) From the left side of the gear bracket assembly, remove the

two screws

attaching the gear bracket cover. (See

Fig.19.)

(7) Pull out the joint gear in the direction of the arrow. (See

Fig.20.)

(8) Pull out the hex gear and second wheel together in the di-

rection of the arrow. (See Fig.20.)

(9) Pull the second wheel out of the hex gear. (See Fig.21.)

(10) Pull the third gear in an upward direction. (See Fig.22.)
(11) From the top side of the display drive unit, disconnect the

wire from the connector

CN331

on the motor board. (See

Fig 22.)

(12) Remove the screw

attaching the R.L.S. bracket. (See

Fig.22.)

(13) Take out the R.L.S. barcket with other parts from the dis-

play drive unit. (See Fig.22.)

Reference:

When attaching the R.L.S. bracket, pass the wire
through the sections

on the wire holder as before. (See

Fig.22.)

(14) From the back side of the R.L.S. bracket, remove the screw

attaching the R.L.S. spring to the R.L.S. barcket and re-

move the R.L.S. spring in the direction of the arrow. (See
Fig.23.)

Reference:

When attaching the R.L.S. spring, hang the torsion
spring (R.L.S.) on the R.L.S. spring as before. (See
Fig.23.)

(15) From the front side of the R.L.S. bracket, remove the

R.L.S. gear toward this side. (See Fig.24.)

Reference:

When attaching the R.L.S. gear, attach the torsion spring
(R.L.S.) with it as before. (See Fig.24.)

Fig.17

Fig.18

Fig.19

Motor board

CN311

Worm guide

Motor bracket (A)

Motor

Gear bracket assembly

Display drive unit

Gear bracket assembly

Gear bracket cover

Summary of Contents for EXAD KD-AV7000












































































































Search results

Summary of Contents for EXAD KD-AV7000

Reviews:

Related manuals for EXAD KD-AV7000

Brands by name

Popular brands

JVC EXAD KD-AV7000, Service Manual

Search results

Summary of Contents for EXAD KD-AV7000

Reviews:

Related manuals for EXAD KD-AV7000

Brands by name

Popular brands