Filename [DVM70S_12Editing.fm]
Masterpage:Left+
60
EN
EDITING
Page 60
Friday, 6 May 2005 12:06
You can dub programs from a camcorder or DV equipment
connected to the unit with a DV cable. The unit’s remote control
allows you the limited control of the connected camcorder or DV
equipment functions during dubbing.
The following on-screen display for DV dubbing appears when
ON SCREEN
is pressed while the channel has been set to
A
DV
B
.
A
Remote control switch
To switch between the devices operable by the remote control
unit. The unit is operable when the remote icon (
)
displayed faces to the left, while the DV device is operable
when the remote icon is facing to the right.
B
Auto capture button
Select to start or pause the dubbing. If
ENTER
is pressed when
the DV device is in the pause condition, preroll editing* where it
is possible to dub with a start time that is highly accurate will be
activated. When the DV device cannot be operated from the
unit (such as in camera mode), proceed with normal recording
(
A
pg. 34, 37).
* Preroll editing refers to the playback after the DV tape is slightly
rewind. (For DV devices that do not support the –1x speed, the
rewinding time may be longer.)
C
Sound monitor switch
For selecting the desired sound format for dubbing.
1
Connect a camcorder or DV equipment to the [DV IN]
connector on the unit’s front panel.
2
Press
DV/HDD/DVD
on the unit repeatedly or
HDD
on the
remote so that the HDD lamp lights up on the unit.
3
Press
CH +/-
to set the channel to
A
DV
B
.
4
Press
ON SCREEN.
●
The on-screen display for DV dubbing appears.
5
Press
D E
to select
, then press
ENTER
to display
the remote icon (facing to the right) for the DV equipment.
6
Press
REC MODE
repeatedly to set the recording mode.
7
Locate the point from where you want to start dubbing, then
stop or pause playback by pressing the following buttons on the
remote control:
I
,
N
,
O
,
o
,
W
.
●
To play back in slow speed (1/10 of the normal speed), press
W
to pause playback, then press
O
or
N
.
●
To play back frame-by-frame, press
W
to pause playback, then
press
W
repeatedly. Each press of
W
advances a frame.
●
To change the playback direction, press
O
or
N
.
8
Press
D E
to select
, then press
ENTER
repeatedly
until the desired sound track appears on the TV screen.
SOUND1
:
Select this to record the original stereo sound played back on
the connected DV equipment.
SOUND2
:
Select this to record the dubbed stereo sound played back on
the connected DV equipment.
MIX
:
Select this to record the sound of both
A
SOUND1
B
and
A
SOUND2
B
.
●
Note that this selection is not available when the source
program is recorded in 16BIT (48 kHz) mode.
9
Press
D E
to select
, then press
ENTER
. The
dubbing starts.
●
Playback on the external DV equipment and recording on the
unit should start simultaneously.
●
To pause dubbing, press
D E
to select
, then press
ENTER
. Both the unit and the external DV equipment pause
dubbing. Pressing
W
on the unit also works the same way.
10
Press
D E
to select
, then press
ENTER
. Then
press
o
. The DV equipment stops.
11
Press
D E
to select
, then press
ENTER
.
DV Dubbing (HDD & DVD Deck Only)
NOTES:
●
Use the DV cable VC-VDV 204U for connection.
●
When you connect a PC to the [DV IN] connector, we do not
assure the normal operation of this unit.
To [DV IN]
DV cable
(VC-VDV 204U)
(not supplied)
Camcorder
DV connector
Your unit
DV equipment
L – R
SOUND1
0:00
1:00
2:00
GR-DV3500
GR-DV3500
DV
HDD
00:00:00. 00
12bit
JVC
00:00:00. 00
DV
FR360
DV
DV
1 2
A
B
C
DVM70S_00.book Page 60 Friday, May 6, 2005 12:06 PM
