Filename [DVM70S_06DVD Operation.fm]
Masterpage:Left+
36
EN
BASIC OPERATIONS ON DVD DECK
Page 36Friday, 6 May 2005 12:06
Free Rate Function
To record the entire program, the unit automatically sets the
appropriate recording mode depending on the combination of the
total time of the program to be recorded and either the remaining
disc space or the specified recording time (from 60 minutes to 480
minutes).
8
To record the entire program within the actual remaining
disc space (DVD deck only)
Select
A
FR (JUST)
B
in a recording mode selection procedure.
●
Note that this function is available only for timer programming
recording (
A
pg. 46, 48) and dubbing from HDD to DVD
(
A
pg. 57).
8
To record the entire program by specifying the desired
recording time
Select
A
FR60–FR360
B
,
A
FR420
B
or
A
FR480
B
in a recording mode
selection procedure. (
A
pg. 34, 37, 46, 48)
8
To record a 25-min. long daily program five times just on
the same DVD disc for example
Perform
A
VCR Plus+ Timer Programming
B
(
A
pg. 46) procedure.
Be sure to set the recording mode to
A
FR125
B
and set Weekly/
Daily Rec Function to
A
MON-FRI
B
in step
8
to fit the total recording
time to the whole disc space.
When the same program is recorded in SP mode instead of in
A
FR125
B
, the 5th program cannot be recorded.
NOTES:
●
You can program this unit to timer-record, regardless of the disc
remaining time. When the disc remaining time is not enough, the
unit performs
A
Relief Recording
B
(
A
pg. 48). To avoid this, make
sure of the disc remaining time before setting timer programming.
(Example)
If you programmed to timer-record for 60 minutes in
SP mode on a 120-minute disc, the disc remaining time would be
30 minutes in XP mode, 60 minutes in SP mode, 120 minutes in
LP mode, 180 minutes in EP mode, and 240 minutes in FR480
mode. Timer-recording will not complete beyond these remaining
times.
●
The maximum recording time of FR (JUST) mode is the same as
the recording time of FR480 mode. When timer programming a
long program in FR (JUST) mode on a disc whose remaining
time is short, it is recommended to check the disc remaining time
in FR480 mode to see if the remaining time is enough for the
program.
●
Even if more than one program are timer programmed in FR
(JUST) mode, only the first one is recorded.
●
In order to ensure that the recording fits on the disc, this feature
may leave a slight non-recorded section at the end of the disc.
●
There may be some noise and sound disturbance at the point on
the disc where the unit switches the mode.
Second Audio Recording
This unit’s built-in MTS decoder enables reception of Multichannel
TV Sound broadcast. To record a SAP program received, set
A
2ND
AUDIO RECORD
B
to
A
ON
B
. (
A
pg. 72)
NOTES:
When the channel is changed on the unit;
●
The
A
MONO
B
indicator appears on the screen for about 5
seconds if the program is a monaural broadcast.
●
The
A
STEREO
B
indicator appears on the screen for about 5
seconds if the program is a stereo broadcast.
●
Both
A
STEREO
B
and
A
SAP
B
indicators appear when a stereo
program is accompanied by SAP sound.
●
Both
A
MONO
B
and
A
SAP
B
indicators appear when the main audio
on the monaural broadcast is accompanied by SAP sound.
Blank
A: 1st
B: 2nd
C: 3rd
D: 4th
E: 5th
A: 1st
B: 2nd
C: 3rd
D: 4th
E: Blank (20 min.)
Blank
DVM70S_00.book Page 36 Friday, May 6, 2005 12:06 PM
