9
Showing Input Signals
On the Information Display
On the Status Display
Main Menu
Exit&Status
Picture Adjustments
Signal and Color
Signal Scanning
Audio
External Control
＞
＞
＞
＞
＞
＞
＞
＞
Status
Channel XXX
Format XX
Video Lumina Range XXXX
YUV Color Matrix XXXX
Processing Color Space XXX
Color Temperature XXX
Scanning XXX
Loaded Profile XXX
Firmware Version XXX
1
2
3
4
5
6
7
8
9
Time code (SDI)
Under SDI input, the monitor can display Time code
information (LTC, VITC1&2). If no Time code info is
detected, it will display “TC UNLOCKED”.
UMD
Display TSL 3.1/4.0 UMD or User input Source ID.
( page 17.)
Audio VU/PPM meters
Display meters of SDI/HDMI embedded audio
The audio meter on screen positions, markers
and background colors are adjustable.
( page 15.)
Histogram
Parallel display R/G/B/Y histogram for SDI and HDMI video.
( page 14.)
Vector scope
Display vector scope with 100% and 75% markers for SDI and
HDMI video. The vector scope pattern display positions,
colors, background are adjustable.
( page 14.)
Waveform
Display waveform scopes for SDI and HDMI video with
markers. The display waveform can be selected from Y/Cb/Cr/
R/G/B /RGB types, and single line display mode selectable. The
waveform display positions, colors, background are adjust-
able. ( page 14.)
Press “MENU” button, the main menu will pop up from the left
top of the screen, and display the current working status,
including:
Channel
Display the current displayed input source. Switch on Multiview,
the channel diaplays Multiview.
Display the video format of current input source.
Format
If no video detected in current input source, it will display
“No Signal”
Video Lumina Range
Display the current set of video lumina level range value.
YUV Color Matrix
Display the current set of YUV color matrix.
Processing Color Space
Display the current set of color space.
Color Temperature
Display the current set of color temperature.
Scanning
Display the current set of scan mode.
Loaded Profile
System Version
1
1
2
3
4
5
6
7
8
9
3
On screen TALLY
Display TALLY signal from GPI port. ( page 16.)
2
6
Color Checker
4
7
8
9
1
5
3
2
4
6
7
8
9
Display color gamut chart and Delta chart for last
calibrated value and current messured value.
( page 10.)
Lissajous
5
Display audio Lissajous pattern. ( page 15.)
Diaplay the current firmware version.
Display the currrent loaded user profile.
Switch on Multiview, the format of 4-channel SDI signals
will be displayed respectively.
Tool & Information
System Setting
TC 00:15:13:07
CAMERA 1
R
R75
Mg
Mg75
B
B75
Cy
Cy75
G
G75
YI
YI75
W
Delta = 1.0
R
R75
Mg
Mg75
B
B75
Cy
Cy75
G
G75
YI
YI75
W
Delta = 2.3
2 3 4 5 6 7 8 9 10111213141516
1
L -20DB 01CH
R -22DB 01CH
-09
-20
-48
in phase
L
R
