background image

3

Do not use the product for a long time if the sound is distorted. 

Safety Precautions (cont.)

Under the following conditions,
1. 

Turn off the power.

2. Unplug this product from the wall outlet.

3. Refer service to qualified service personnel.

a)

 

When the product emits smoke or unusual smell.

b) When the product exhibits a distinct change in perfor-

mance —for example, no picture or no sound.

c) If liquid has been spilled, or objects have fallen on the 

product.

d) If the product has been exposed to rain or water.

e) If the product has been dropped or damaged in any 

way.

f)  When the power supply cord or plug is damaged.

• Make enough room for inserting or removing the power plug. 

Place the product as close to an AC outlet as possible. The 

main power supply for the product is controlled by inserting or 

removing the power plug.

• When you install the product in a place where you cannot 

easily insert or remove the power plug from an AC outlet, do 

not use the provided power cord holder, and insert or remove 

the power cord from the AC inlet on the product.

• When the product is left unattended and unused for a long 

period of time, unplug it from the wall outlet and disconnect 

the cable system.

• Do not overload wall outlets, extension cords, or conve-

nience receptacles on other equipment as this can result in a 

risk of fire or electric shock.

• Use only the accessory cord designed for this product to 

prevent shock.

• Do not install this product in the following places:

 – in a damp or dusty room

 – where the product is exposed to soot or steam, such as near the cooking counter or a humidifier

 – near heat sources 

 – where condensation easily occurs, such as near the window

• Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious injury to a child or adult, 

and serious damage to the product.

 The product should be mounted according to the manufacturer’s instructions, and should use a mount recommended by the 

manufacturer.

• Do not use this product near water.

• Be sure to install the product in the place where proper temperature and humidity are kept.

 This product becomes hot during its use. Take enough care when handling the product.

Do not attempt to service this product yourself, as opening or 

removing covers may expose you to dangerous voltages and 

other hazards. Refer all service to qualified service personnel.

When the product is left unattended and unused for a long 

period of time, unplug it from the wall outlet and disconnect the 

cable system.

Do not overload wall outlets, extension cords, or convenience 

receptacles on other equipment as this can result in a risk of 

fire or electric shock. 

•  

Slots and openings in the cabinet are provided for ventilation. These ensure reliable operation of the product and protect it 

from overheating. These openings must not be blocked or covered. 

•  

Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-circuit 

the parts, which could result in a fire or electric shock.

•  

Never spill liquid of any kind on the product.

•  

Never place anything on the product. (Placing liquids, naked flames, cloths, paper, etc. on the product may cause a fire.)

•  

Do not apply any strong shock to the LCD panel. (Do not hit any object against it or push it with a sharp-pointed tool.)

•  

Do not put heavy objects on the product.

•  

Do not step on or hang on the product.

• Before connecting other products such as VCR’s and personal computers, you should turn off the power of this product for 

protection against electric shock.

• Do not use attachments not recommended by the manufacturer as they may be hazardous.

• When replacement parts are required, be sure the service technician has used replacement parts specified by the manufac-

turer or equivalents. Unauthorized substitutions may result in fire, electric shock, or other hazards.

• Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine 

that the product is in proper operating condition.

Summary of Contents for DT-U17



























Reviews: