JVC DR-MV2SEU, Service Manual

Page: 36 / 99

1-36 (No.YD087)
SECTION 5
TROUBLESHOOTING
5.1 HOW TO INITIALIZE THE DVD RECORDER
To put the program back at the factory-default, initialize the DVD
recorder as the following procedure.
(1) Turn the DVD recorder on.
(2) Confirm that no disc is loaded or that the disc tray is open.
To put the DVD recorder into the Version display mode,
press [
], [1], [2], and [3] buttons on the remote control in
that order.
Fig. 1 appears on the screen.
Fig.1
(3) Press [ENTER] button, then the DVD recorder starts initial-
izing. When the initializing is completed, the DVD recorder
exits the Version display mode and turns off the power au-
tomatically.
• To move into the Normal mode from the Version display
mode, press [RETURN] button on the remote control in-
stead of [ENTER] button.
• When [STANDBY/ON] button is pressed before [EN-
TER] button is pressed, the DVD recorder exits the Ver-
sion display mode, then the power turns off.
Model Name : *******
Firmware V ersion
BE :
FE :
API :
TT :
DEFAULT SETTING : ENTER
EXIT : RETURN
W2V3176H2S
R20_057_000
Ver 1.08
T20198FSP
*1: "*******" differs depending on the models.
*2: Firmware Version differs depending on the
models, and this indication is one example.
Version Display Mode Screen
F/W VERSION