JVC DR-MV2SEU, Service Manual

Page: 12 / 99

1-12 (No.YD087)
3.1.2.1 Reference Notes
CAUTION :
Locking Tabs (L-1) and (L-2) are fragile.
Be careful not to break them.
(1)
a) Release five Locking Tabs (L-1).
b) Release three Locking Tabs (L-2)
c) Disconnect Connector (CN1505), and remove the
Front Assembly.
(2) When reassembling, solder wire jumpers as shown in Fig.
8.
(3) Before installing the Deck Assembly, be sure to place the
pin of LD-SW on Main CBA as shown in Fig. 8. Then, install
the Deck Assembly while aligning the hole of Cam Gear
with the pin of LD-SW, the shaft of Cam Gear with the hole
of LD-SW as shown in Fig. 8.
Fig.1
Fig.2
Fig.3
Fig.4
(S-1)
(S-1)
(S-1)
[1] Top Cover
(L-1)
(S-2)
(S-2)
(S-3)
(L-2)
(L-1)
(L-1)
[2] Fr ont
Assemb ly
[3] Fr ont
Brac ket
[4] Radiation Sheet
CN1505
(S-4)
Jack Earth Plate
[5] Jac k Brac ket
[6] Fr ont
Jack CBA
(S-5B)
(S-5A)
(S-5A)
[7] DVD
Mechanism
&
DVD Main
CBA
Assemb ly
CN501
CN601