JVC DR-M10S, Instructions Manual

Page: 94 / 116

Filename [DR-M10SE_11Subsidiary.fm]
Masterpage:Left+
94
EN
Page 94 February 12, 2004 5:31 pm
SUBSIDIARY SETTINGS (cont.)
RECORDING SET
(The boldface settings in the table below indicate the settings at your purchase.)
8
SAVE AS LIBRARY
OFF
ON
When this function is set to “ON”, the recording information is automatically
stored in the library. For details, refer to “Modify Library Information”
(
墌
pg. 74).
8
XP MODE REC AUDIO
DOLBY DIGITAL
LINEAR PCM
You can select the audio format when you record a programme in XP mode.
When this function is set to “LINEAR PCM”, you can obtain a high-quality
audio sound.
DOLBY DIGITAL
:
To record in Dolby Digital format.
LINEAR PCM :
To record in Linear PCM format.
8
AUDIO REC
NICAM 1/MAIN
NICAM 2/SUB
MONO
You can select the desired NICAM audio channel to be recorded on a DVD-R/
RW (Video mode) disc.
NICAM 1/MAIN :
To record the main language of NICAM audio.
NICAM 2/SUB :
To record the sub language of NICAM audio.
MONO :
To record the standard (monaural) sound of NICAM audio.
NOTE:
This function works only for the NICAM bilingual programme.
8
DIRECT REC
OFF
ON
When this function is set to “ON”, you can easily start recording the
programme that you are watching on your TV. Press and hold
7
and press
4
on the remote control, or press
7
on the unit.
NOTES:
●
When you use the Direct Rec function, be sure to use a TV offering T-V LINK, etc. and
connect a fully-wired 21-pin SCART cable between the unit and the TV. (
墌
pg. 16)
●
If “DIRECT REC” is set to “OFF”, the
7
button functions as described in “Basic
Recording” (
墌
pg. 51).
●
During Direct Rec, “– –” appears on the front display panel.
●
If a programme is recorded with the Direct Rec, the station name will not be registered
in the library. “– – – –” will be displayed for the station name.
●
Even if there is no power supply for more than 60 minutes, the unit keeps the setting.
8
INPUT COLOUR SYSTEM
PAL
SECAM
You can play back PAL discs, or record PAL and SECAM signals on this unit.
Select the appropriate colour system.
PAL : To record PAL signals.
SECAM : To record SECAM signals.
DR-M10SE_01.book Page 94 Thursday, February 12, 2004 9:08 PM