Filename [DX5SEU_10Timer Recording.fm]
Masterpage:Left0
Page 44Wednesday, 23 November 2005 14:13
TIMER RECORDING ON HDD/DVD DECK
You can programme this unit to timer record as many as 16
programmes.
With the S
HOW
V
IEW
system, timer programming is greatly
simplified because each TV programme has a corresponding code
number which your unit is able to recognise.
You can use the remote control to enter the S
HOW
V
IEW
number.
1
Load a recordable disc if recording to DVD.
2
Press
to access the programme top screen.
3
Press
selection keys
to select
.
●
PROGRAMME FULL DELETE UNWANTED TIMER
appears on the TV screen, you need to
cancel some of the reserved programmes. (
4
Press the
number keys
to
enter the S
HOW
V
IEW
number
of a programme you wish to
record.
OR
Press
selection keys
to select
the desired number key on the
screen, then press
.
Repeat to enter all required
numbers.
●
If you have made a mistake, press
selection keys
to select
or
, then press
and input the
correct number before you press
again.
5
Press
selection keys
to select
, then press
. Press
selection keys
to select the desired recording
deck, then press
6
Press
selection keys
to select
, then press
.
●
If the number you entered is invalid,
CONFIRM SHOWVIEW NO. THEN RETRY
screen. Input a valid S
HOW
V
IEW
number.
●
If
GUIDE PROGRAMME IS NOT SET SET GUIDE
appears on the TV screen, set
Guide Programme Numbers manually. (
7
The S
HOW
V
IEW
number you entered and the matching timer
recording information are displayed on the TV screen. Check
the programme data.
●
To cancel this setting, press
8
Press
selection keys
to select the desired recording option as
required. Press
selection keys
to select the desired setting,
then press
.
●
●
●
●
●
9
Press
selection keys
to select
access the Programme Confirmation screen.
10
Press
selection keys
to select
to
complete timer programming.
●
To programme another timer, press
selection keys
to select
●
appears on the TV screen,
delete or modify the programmes.
●
There may be cases that the S
HOW
V
IEW
Timer Programming
function prolongs the stop time of the programming.
●
When two successive programmes are recorded on a DVD-RW
disc with the S
HOW
V
IEW
Timer Programming function, the
beginning of the second one may be left off the recording.
●
If the copy limited programme is received during timer recording,
the unit enters Record Pause mode. Recording starts again if it is
switched to a recordable broadcast during the time you
programmed.
S
HOW
V
IEW
Timer Programming
●
Make sure that the unit’s built-in clock is set properly.
●
Turn on the unit.
●
Turn on the TV and select the AV mode.
●
Slide the
PROGRAMME
DISPLAY
0 – 9
VPS/PDC
j
RETURN
FGDE
ENTER
CABLE/SAT
DVD
TV
Selection Keys
SHOWVIEW NO.
1 2 3 4
1 2
4 5 6
7 8 9
0
3
1
2
3
1
2
2
3
ENTER
SELECT
PROGRAMME
EXIT
PROGRAMME > SHOWVIEW (1/2)
PRESS [PROGRAMME]
TO EXIT
SELECT WITH @
THEN PRESS [ENTER]
RECORD TO
DVD
CONFIRM
DELETE
DELETE ALL
Make sure the channel position number you wish to record is
displayed; if not, see
set the Guide Programme number correctly.
If you have moved to a different area or if a broadcasting
station’s channel number has been changed, the wrong channel
number will be displayed on the S
HOW
V
IEW
programme screen
in step
. When this happens, set the correct Guide Programme
number for that station. (
DX5SEU_00.book Page 44 Wednesday, November 23, 2005 2:13 PM