JVC DLA-VS4500 Instruction Manual Download Page 21

Page: 21 / 68

Connecting the Projector

Do not turn on the power until connection is complete.

The connection procedures differ according to the device used. For details, please refer to the instruction manual

of the device to be connected.

This projector is used for projecting images. To output the audio of connected devices, please connect a separate

audio output device, such as an amplifier or speaker.

Some cables cannot be connected to this unit due to the size of their connector cover.

Connecting to the DisplayPort Terminals

DisplayPort Terminal

This Unit

PC, etc.

DisplayPort Cable (Sold Separately)

To [DisplayPort 1] to [DisplayPort 4]
Input Terminals

For single-channel input signals, connect to one of the [DisplayPort 1], [DisplayPort 2], [DisplayPort 3] or [DisplayPort

4] input terminals.

For two-channel input signals, connect to the [DisplayPort 1] and [DisplayPort 3] input terminals.

For four-channel input signals, connect to the [DisplayPort 1] to [DisplayPort 4] input terminals.

“Types of Possible Input Signals” (P. 57)

Video images may not appear if a cable that does not support HBR2 is used. Use a cable that supports HBR2.

When disconnecting the DisplayPort cable, make sure to remove the latch and unplug the cable.

Connecting to the LAN Terminal

Desktop PC, etc.

Server

Hub

Network

Connection Cable

(Sold Separately)

This Unit

To [LAN] Terminal

The network is used to control this unit. It is not used for sending or receiving video signals.

Please contact your network administrator for information concerning the network connection.

For more information on control, please refer to “External Control”P. 50.

Set up

Summary of Contents for DLA-VS4500





































































Search results

Summary of Contents for DLA-VS4500

Reviews:

Related manuals for DLA-VS4500

Brands by name

Popular brands

JVC DLA-VS4500, Instruction Manual

Search results

Summary of Contents for DLA-VS4500

Reviews:

Related manuals for DLA-VS4500

Brands by name

Popular brands