JVC DLA-VS2400G, Instructions Manual

Page: 50 / 64

Video image looks unnatural
Colors are unnatural
Check Action Refer to
Is the color space of the input signal
correctly set?
The color may turn out unnatural when the input signal is
different from that in the projector setting.
Set the “Color Space” for “Input Signal” correctly.
p. 29
Is the image correctly adjusted? Adjust “Color” and “Tint” accordingly. p. 28, p. 28
Is the video source equipment properly
connected?
Check to ensure that the video source equipment is
properly connected.
p. 19
* The video image may appear slightly reddish immediately after starting up. This is not a malfunction.
Video image is fuzzy
Check Action Refer to
Is the focus correctly adjusted? Adjust the focus. p. 31
Is the unit placed too near or too far away
from the screen?
Set the unit at a correct distance from the screen. p. 57
Projected image is dark
Check Action Refer to
Is the lamp near exhaustion? Check the lamp time in the “Information” menu. Prepare a
new lamp unit or replace as soon as possible when the
lamp is near exhaustion.
p. 38
p. 39
Is the aperture closed? Adjust the Aperture. p. 25
Is “Lamp Power” set to “Low”? Set “Lamp Power” to “High” p. 25
Video images are missing
Check Action Refer to
Has screen mask been configured? Set “Mask” to “Off”. p. 30
Is the display position misaligned? Alter the “Picture Position” value so that the entire image
appears on the screen.
p. 30
50
Troubleshooting