JVC DLA-VS2400G Instructions Manual Download Page 22

Page: 22 / 64

Viewing Videos

MEMO

When you are using this unit, be sure to remove the lens sheet.

Connect the power cord, and ensure that the “STANDBY/ON” indicator

lights up in red.

Turn on the power

Projector unit: press the

[STANDBY/ON] button

Remote control (sold separately): press the

[ON] button

The “STANDBY/ON” indicator light switches from red to green (light

goes off after the unit starts up).

LAMP

WARNING

STANDBY/ON

TANDBY

LAMP

WARNING

STANDBY/ON

TANDBY

During lamp startup

“STANDBY/ON” lights up (green)

In standby state

“STANDBY/ON” lights up (red)

Choose the image to project

Projector unit: press the [INPUT] button (pressing the button each time

switches the mode)

HDMI 1

HDMI 2

Dual

Remote control (sold separately):

Button

Terminal

[HDMI 1]

HDMI1

[HDMI 2]

HDMI2

[COMP.]

Dual

Play back the selected device to project the image.

To hide the image temporarily
Press the [HIDE] button on the projector unit or remote control (sold

separately)

The “STANDBY/ON” indicator light starts to blink in green.

Press the [HIDE] button again to resume display of the image.

The power cannot be turned off when the image is temporarily hidden.

LAMP

WARNING

STANDBY/ON

Operate

Summary of Contents for DLA-VS2400G

































































Search results

Summary of Contents for DLA-VS2400G

Reviews:

Related manuals for DLA-VS2400G

Brands by name

Popular brands

JVC DLA-VS2400G, Instructions Manual

Search results

Summary of Contents for DLA-VS2400G

Reviews:

Related manuals for DLA-VS2400G

Brands by name

Popular brands