3. Projector Software Update
The software is accepted when the projector in STAND-BY Mode.
For example DLA-X70R
(1) Click "Start" on PC →Select "ILA-FPJ X70R" from "ALL programs"
This will start the ILA-FPJ Updater.
Note:
Press [Update Firmware]
Set IP Address to projector's IP address if required.
(2) The software update will start. Please wait until it is finished.
Caution
:
Do not unplug the cable
while
the update
is in progress.
The STANDBY indicator display lights Orange when starting the update.
Then the three LEDs will light up.
Close Up LEDs
If a Windows Firewall warning message
appears, please select "Unblock".
The first part of the update (Main Firmware)
will proceed quickly.
The second part of the update (Sub Firmware)
will proceed very slowly.
The entire update process will take over
10 minutes. Please continue to wait.
