background image

Replacing the Lamp

The lamp is a consumable item. If the image appears dark or the lamp goes out, replace the lamp unit.

0

When the lamp replacement time approaches, the user is notified with a message displayed on the screen and by

the indicator. (P. 92)

Lamp Replacement Procedure

CAUTION

0

Do not insert your hands into the lamp

compartment. This could cause significant

deterioration in the performance of the

equipment, or lead to injury and electric shock.

0

Do not replace the lamp immediately after the unit

has been used. Allow a cooling period of at least

one hour before replacement. The temperature of

the lamp is still high, and may cause burn injuries.

0

Do not subject the lamp unit to shock. Doing so

may cause lamp blowout.

0

Do not use a flammable air duster to clean the

internal parts of the unit. Doing so may cause fire.

0

Use only genuine replacement parts for the lamp

unit. Also, never attempt to reuse an old lamp unit.

Doing so may shorten the lamp life and cause a

malfunction.

0

Do not touch the surface of a new lamp. Doing so

may shorten the lamp life and cause lamp

blowout.

0

When replacing the lamp, be careful not to injure

yourself as the lamp may be broken.

0

When replacing the lamp of a projector

suspended from the ceiling, work at height is

required. This is a dangerous operation. Please

consult our service center.

1

Remove the power plug from the

outlet

2

Remove the lamp cover

0

Remove the screw with a 

t

 screwdriver

3

Loosen the screws of the lamp unit

0

Loosen the screws with a 

t

 screwdriver.

4

Pull out the lamp unit

5

Install the new lamp unit

72

Maintenance

Summary of Contents for DLA-N5




































































































Reviews: