Master Page: Right
— 14 —
Connect the USB cable to copy still image files in a memory card to the PC or to use ImageMixer in capturing
video.
1
To assure safety, make sure all units are turned off before making any connections.
2
Use the USB cable to connect the camcorder to the PC.
NOTES:
●
It is recommended to use the AC Adapter as the power supply instead of the battery pack.
●
When the USB cable is connected, turning on or off the camcorder or switching the VIDEO/MEMORY
(DSC) mode on the camcorder causes malfunctions of the PC.
●
If you connect the camcorder to the PC through a USB hub, compatibility issues between the hub and the
PC may result in instability in the operation of the PC. If this happens, connect the camcorder directly to the
PC, not through the hub.
●
Do not use an extension USB cable.
Follow the procedure described below to install the software.
Quit any other software you are using.
1
Load the provided CD-ROM into the PC. Double click the CD-ROM icon.
2
Double-click the [ImageMixer] folder in the CD-ROM.
3
Double-click the [Install ImageMixer] icon.
The installer starts up. Follow the instructions which appear on the screen.
NOTES:
●
The software instruction manual is included on the CD-ROM in PDF format. Double-click the [Docs]
folder. Open the “Start.pdf” file and click the button of the desired language. Note that Adobe
®
Acrobat
®
Reader
TM
or Adobe
®
Reader
®
must be installed to read PDF files.
●
Adobe
®
Acrobat
®
Reader
TM
or Adobe
®
Reader
®
can be loaded from Adobe’s web site:
http://www.adobe.com/
Connections (Macintosh)
Software Installation (Macintosh)
PC
USB cable
Camcorder
To USB connector
To USB connector
M4D1+DSC_InstaGuide.fm Page 14 Tuesday, September 16, 2003 8:48 AM
