Master Page: Right
— 13 —
When using Windows
®
2000/Me/XP
1
Confirm that the message [ACCESSING FILES] is not currently displayed on the LCD
monitor of the camcorder.
●
If the message [ACCESSING FILES] is currently displayed, wait until it disappears before proceeding.
2
Double-click the [Safely Remove Hardware] or [Unplug or
Eject Hardware] icon in the status bar.
The [Safely Remove Hardware] or [Unplug or Eject Hardware] dialog
box appears.
Windows
®
XP
: If not, wait a while then go to step
5
.
3
Select [USB Mass Storage Device] or [USB Disk], and then click [Stop].
The [Stop a Hardware device] dialog box appears.
4
Click [OK].
Windows
®
2000/Me
: If a message indicating that the device can be safely removed appears, click [OK]
and then click [Close].
The model name depends on the connected camcorder.
5
Disconnect the USB cable.
6
Set the camcorder’s Power Switch to “OFF”.
The camcorder turns off.
●
Windows
®
2000/XP
●
Windows
®
Me
●
Windows
®
2000/XP
●
Windows
®
Me
M4D1+DSC_InstaGuide.fm Page 13 Tuesday, September 16, 2003 8:48 AM
