JVC CD/Cassette Receiver KW-XC939 Instruction Manual Download Page 37

Page: 37 / 50

ENGLISH

To play back only intro (Intro scan)

Press MODE repeatedly until
“INTRO” appears.

Press SEL (select).
Each time you press the
button, CD intro scan mode
changes as follows:

Mode

Indicator

Plays the

beginnings

(15 seconds)

INTRO1 ON Track number Of all tracks on all

flashes

inserted discs.

INTRO2 ON Disc number

Of the first track on

flashes

each inserted disc.

INTRO OFF None

Canceled.

Ex.: When “INTRO1 ON” is selected.

Ex.: When “INTRO2 ON” is selected.

Disc number

Track number

REPEAT

RANDOM

INTRO

Canceled

(Continuous play)

INTRO1 ON

INTRO OFF

INTRO2 ON

Selecting CD playback modes

To play back tracks repeatedly (Repeat
Play)

Press MODE repeatedly until
“REPEAT” appears.

Press SEL (select).
Each time you press the
button, CD repeat play mode
changes as follows:

Mode

RPT

Plays repeatedly

Indicator

REPEAT1 ON Lights

The current track (or
specified track).

REPEAT2 ON Flashes

All tracks of the current
disc (or specified disc).

REPEAT OFF Goes off

Canceled.

To play back tracks at random
(Random Play)

Press MODE repeatedly until
“RANDOM” appears.

Press SEL (select).
Each time you press the
button, CD random play mode
changes as follows:

Mode

RND

Plays at random

Indicator

RANDOM1 ON Lights

All tracks of the
current disc, then the
tracks of the next
disc, and so on.

RANDOM2 ON Flashes

All tracks of all discs
inserted in the
magazine.

RANDOM OFF Goes off

Canceled.

REPEAT

RANDOM

INTRO

Canceled

(Continuous play)

REPEAT1 ON

REPEAT OFF

REPEAT2 ON

REPEAT

RANDOM

INTRO

Canceled

(Continuous play)

RANDOM1 ON

RANDOM OFF

RANDOM2 ON

EN35-37KW-XC939[EE]f.pm6

6/23/03, 3:50 PM

Summary of Contents for CD/Cassette Receiver KW-XC939



















































Search results

Summary of Contents for CD/Cassette Receiver KW-XC939

Reviews:

Related manuals for CD/Cassette Receiver KW-XC939

Brands by name

Popular brands

JVC CD/Cassette Receiver KW-XC939, Instruction Manual

Search results

Summary of Contents for CD/Cassette Receiver KW-XC939

Reviews:

Related manuals for CD/Cassette Receiver KW-XC939

Brands by name

Popular brands