JVC CA-PCX290, Service Manual

Page: 38 / 83

1-4 (No.MB200)
SECTION 3
DISASSEMBLY
3.1 Main body
3.1.1 Removing the front cabinet section and rear cabinet
section (See Fig.1 to 6)
(1) Remove the five screws A and the five screws B on the
back of the body.
(2) Remove the screw D on each side of the body.
(3) Move the rear cabinet backward, and disconnect the an-
tenna wire from the antenna terminal on the inside of the
rear cabinet.
(4) Disconnect the wire from connector CN401 on the main
board on the front cabinet section.
Fig.1
Fig.2
Fig.3
Fig.4
Fig.5
Fig.6
B
B
B
A
A
A
Rear cabinet section
D
Rear cabinet section Front cabinet section
Front cabinet section Rear cabinet section
D
Rear cabinet section
Front cabinet section
CN401
Antenna terminal
Main board
CN401
Antenna terminar
Antenna wire