JVC CA-PCX290, Service Manual

Page: 45 / 83

(No.MB200)1-11
3.3 Rear cabinet section
• Prior to performing the following procedure, remove the front cabinet section and rear cabinet section.
3.3.1 Removing the fuse board / A/C jack / power transformer assembly (See Fig.25 to 27)
• Prior to performing the following procedure, remove the front
cabinet section and rear cabinet section.
(1) Unsolder the two wires on the battery spring.
(2) Remove the screw
P attaching the fuse board.
(3) Remove the two screws Q attaching the A/C jack.
(4) Remove the four screws R attaching the power transformer
assembly.
(5) Release the four bands setting the wire to the boss of the
rear cabinet.
(6) Remove the two screws T attaching the bracket.
Fig.25
Fig.26
Fig.27
A/C jack
Power transfomer
assembly
Fuse board
Battery spring
P
R
R
Q
Band
Band
Band
Band
Power tansformer assembly
Brackt
T
T