19
Playing Back a Disc/USB Mass Storage Class
Device
INFO
To insert a disc
The disc player panel is automatically closed and the
System starts reading the disc.
To close the disc player panel manually,
press
0
.
• For some discs, playback automatically starts after the
System finishes reading the disc.
To connect a USB mass storage class device
• For connecting a USB mass storage class device, see page
10.
• Always set the volume level to the minimum when
connecting or disconnecting a USB mass storage class
device.
• To disconnect a USB mass storage class device safely,
turn off the System before disconnecting the device.
To play back a disc/USB mass storage class device
While DVD/CD or USB is selected...
To start:
To pause:
To stop:
To release,
press
3
.
If different types of playable files (audio/still
picture/moving picture) are recorded
Select a file type on the control screen (on the TV).
• For still/moving picture files, it appears while playback is
stopped. For details, see page 35.
1
Control screen appears on the TV.
1
Audio
2
Still picture
3
Moving picture
2
Select a file type.
When the sound of DVD Video or DVD-VR is not loud enough
DVD sound is sometimes recorded at a lower level than
other discs and sources. You can set the increase level for
the currently loaded DVD (without changing the volume
level). To set the increase level, see page 41.
Resume play
The System can store the stop point of playback. When you
start playback again by pressing
3
, playback starts from the
position where you have stopped.
To stop completely,
press
7
twice.
• The following operations also erase the memory of the
stop point:
–
Pressing
0
to open the disc player panel
–
Pressing to turn on the System when the System is
turned off (standby).
Label side
1
2
3
Remote
ONLY
Current file type to play
EN_NX-T10[UG]_CS2.indb 19
EN_NX-T10[UG]_CS2.indb 19
09.12.14 9:53:13 PM
09.12.14 9:53:13 PM