– 36 –
Changing the Source Name
You can change the source names—USB, LINE, and
DIGITAL IN—according to the equipment connected to
the unit.
• You cannot change the source names while recording.
On the remote control ONLY:
1
Press USB/LINE repeatedly to select the source you
want to change.
The unit automatically turns on and the source name
selected previously appears in the main display.
• Each time you press the button, the source changes as
follows:
2
Press and hold USB/LINE until “NAME CHANGE”
appears in the main display.
The selected source name starts flashing in the main
display.
3
Press
¡
/
¢
or
4
/
1
to select the new source
name.
• When “USB” is selected in step
1
Each time you press the button, the source name
alternates between “USB” and “PC.”
• When “LINE” is selected in step
1
Each time you press the button, the source name
changes as follows:
LINE
“
TAPE
“
DBS
“
VCR
“
TV
“
GAME
“
(back to the beginning)
• When “DIGITAL IN” is selected in step
1
Each time you press the button, the source name
alternates between “DIGITAL IN” and “DBS-
DIGITAL.”
• To cancel the setting, press CANCEL.
4
Press SET to finish changing the source name.
The selected source name appears in the main display.
EX. “USB” is selected
6
Change the PC audio setting.
1. If you have closed Control Panel, open it again:
Select [Start]
=
[Settings]
=
[Control Panel].
2. Click [Multimedia Properties], then select “USB
Audio Device [1]” for “Playback” of “Audio,” and
close the window.
3. Open the Volume control on your PC: Select [Start]
=
[Program]
=
[Accessory]
=
[Entertainment]
=
[Volume control].
4. Set the volume appropriately and remove the check
mark in the box at “Mute.”
Now your PC is ready for playback through the USB
connection.
After installation is completed, you can use your PC as the
playback source. The PC automatically recognizes the unit
whenever a USB cable is connected to the PC and the unit
while the unit is turned on.
• When not using the PC as the playback source,
disconnect the USB cable.
*
Microsoft
R
, Windows
R
98, Windows
R
Me and Windows
R
2000 are registered trademarks of Microsoft Corporation.
USB
LINE
DIGITAL IN
EN33-36_CA-NXMD1R[B]f.pm6
01.8.20, 11:34
36
